2G & 3G Lifts

Lift Products G Series Lift Tables

The G-Series Lift Tables have been designed as an economical solution for light duty applications. Available with 2,000 & 3,000 lb. capacities, The G-Series table can improve productivity and reduce injuries by placing loads at an ergonomic work height. The heavy duty 1.7 HP lift motor allows up to 12 full lifts per hour on average, with a competitive lift speed and runs on a 115 volt input 15 amp circuit. Available in 4 models, The G-Series has the right table for many applications. The G-Series tables are stock items and can usually ship in 24 hours.

The 3G-Series Lift Tables features a 2 lift cylinder for increased capacity and has the same standard features as the 2G models.

Ships From:
US Map Wisconsin

Wisconsin

Made By:

Request Quote

Model	Travel	Capacity	Height		Platform Size	Base Size	Speed		Motor	Ship Weight	Quote Form
Model	Travel	Capacity	MIN	MAX	Platform Size	Base Size	Lift	Lower	Motor	Ship Weight	Quote Form
2G-2849	32"	2,000 lbs	8"	40"	28" X 49"	24.75" x 46"	18.5 sec	17.6 sec	1.7 HP	400 lbs	Quote
2G-3849	32"	2,000 lbs	8"	40"	38" X 49"	24.75" x 46"	18.5 sec	17.6 sec	1.7 HP	425 lbs	Quote
3G-3049	32"	3,000 lbs	8"	40"	30" X 49"	29.25" x 45"	28 sec	33 sec	1.7 HP	530 lbs	Quote
3G-3849	32"	3,000 lbs	8"	40"	38" X 49"	29.25" x 45"	28 sec	33 sec	1.7 HP	550 lbs	Quote

	Built In Maintenance Bar The Table includes built-in Flip Down Bars on each side of the outer scissors arms. These bars are to be flipped down while performing maintenance or inspection.	Standard Features Include: Upper Platform Full Perimeter Safety which prevents descent upon contact with an obstruction Low Tension (24v) control box with up and down buttons. In addition, The G-Series includes an electric circuit reset button in case safety perimeter bar is activated Upper limit switch shuts motor off at full height extension reducing wear on lift cylinder and motor Single acting lift cylinder with flow control to prevent fast lowering in case of hose burst Lifetime lubricated bearings on lift arms 1.7 HP 115 volt motor with low amp draw and reliable performance Runs on a standard 15 amp circuit
	Exclusive 1.7 HP Motor This intentionally oversized motor performs at a competitive lift speed with low amp draw. The high torque low RPM (1,700) lift motor is ETL-Rated. This 1.7 HP motor is energy efficient, can run on a standard 15 amp circuit, and also features a very quiet operation.
	Full Perimeter Safety Bar The full perimeter bar stops the table from lowering if it comes in contact with any obstruction. This feature improves safety when the table is used next to machinery, packing tables, work benches or other items when the table could cause entrapment while lowering. To reactivate the table the operator must reset the button on the control box.

Foot Controls

Fork Pockets

Casters

Push Handle

Lift Products G-Series Product Literature (PDF 345KB)
Lift Products G-Series Owner's Manual (PDF 992KB)

Related Product Lines

Southworth Backsaver Lite
	Type:	Light Duty
	Capacity:	550 - 1,500 lbs
	Travel:	26" - 35"
	Down Height:	5.5" - 6.25"
	Up Height:	31.5" - 41.25"
	Min Platform:	20" x 36"
	Max Platform:	36" x 60"

Presto XS
	Type:	Light Duty
	Capacity:	1,000 - 1,500 lbs
	Travel:	24" - 36"
	Down Height:	5.25"
	Up Height:	29" - 41.25"
	Min Platform:	24" x 36"
	Max Platform:	48" x 60"

Bishamon Lift2K
	Type:	Light Duty
	Capacity:	2,000 - 2,500 lbs
	Travel:	30.5"
	Down Height:	8.75"
	Up Height:	39.25"
	Min Platform:	28" x 48"
	Max Platform:	36" x 48"

Lift Products Guardian
	Type:	Light Duty
	Capacity:	1,100 lbs
	Travel:	23.125" - 39.375"
	Down Height:	7.875" - 8.625"
	Up Height:	31" - 48"
	Min Platform:	31.5" x 39.375"
	Max Platform:	39.375" x 67"

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Products

View all products of this category View Products

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: