ECOA DSL Series Double Scissors Hydraulic Lift Tables
|
|
|
|
ECOA DSL Series Lift Tables are high travel double electro-hydraulic scissor lifts with capacities of
2,000 to 6,000 lbs., travel distances of 60 to 144 in. with platform sizes of 30 x 48 to 72 x 132 in.
All ECOA Lift Tables are designed and constructed for heavyduty applications under the toughest
working conditions, offering years of trouble-free operation.
|
Click on image for larger picture
- Optional upper travel limit switch
- Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
- Lifetime self-lubricating, PTFE lined, composite bearings at all pivot points
- Mechanical upper travel stops
- Smooth steel tops
|
|
Features of DSL Series
|
- Straight toeguards with yellow and black safety stripes
- Internally-mounted 1.5HP, 230V, 1PH, 60Hz TENV intermittent duty super torque motor or externally-mounted
4.8HP, 230/460V, 3PH, 60Hz continuous duty motor
- High-pressure gear pump
- On 4.8HP units, manifold with check valve, relief valve, pressure-compensated flow
control valve, solenoid valve, suction and return filters. On 1.5HP power units, valves are
internally mounted on gear pump
- NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN"
pushbutton control station with 20 ft. coil cord
- NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical
connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
- All controller components are UL and/or CSA approved
- 24V operating control voltage
- Hydraulic flow limiter valve at the base of each cylinder
|
|
|
DSL Specifications
|
|
|
|
60" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Height
|
Up Speed
(Seconds)
|
Ship*
Weight
|
Quote Form
|
|
Static
|
Rolling
|
Lowered
|
Raised
|
|
DSL-20-060
|
2,000
|
1,000
|
670
|
10.25"
|
70"
|
16
|
1,500
|
Quote
|
|
DSL-40-060
|
4,000
|
2,000
|
1,340
|
11.75"
|
72"
|
21
|
1,800
|
Quote
|
|
DSL-60-060
|
6,000
|
3,000
|
2,000
|
13.25"
|
73"
|
32
|
1,900
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 30" x 48"
- Maximum Platform Size: 48" x 72"
- Base Frame: 30" x 48"
|
- Numer of Cylinders: 1
- Motor: 1.5HP
|
|
Note: The Number of Cylinders for Model DSL-60-060 is 2.
|
|
|
72" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Height
|
Up Speed
(Seconds)
|
Ship*
Weight
|
Quote Form
|
|
Static
|
Rolling
|
Lowered
|
Raised
|
|
DSL-20-072
|
2,000
|
1,000
|
670
|
10.25"
|
82"
|
21
|
1,600
|
Quote
|
|
DSL-40-072
|
4,000
|
2,000
|
1,340
|
11.75"
|
84"
|
28
|
1,875
|
Quote
|
|
DSL-60-072
|
6,000
|
3,000
|
2,000
|
13.25"
|
85"
|
42
|
2,000
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 30" x 60"
- Maximum Platform Size: 48" x 84"
- Base Frame: 30" x 60"
|
- Numer of Cylinders: 1
- Motor: 1.5HP
|
|
Note: The Number of Cylinders for Model DSL-60-072 is 2.
|
|
|
90" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Height
|
Up Speed
(Seconds)
|
Ship*
Weight
|
Quote Form
|
|
Static
|
Rolling
|
Lowered
|
Raised
|
|
DSL-20-090
|
2,000
|
1,000
|
670
|
14"
|
104"
|
35
|
1,900
|
Quote
|
|
DSL-40-090
|
4,000
|
2,000
|
1,340
|
14"
|
104"
|
28
|
2,050
|
Quote
|
|
DSL-60-090
|
6,000
|
3,000
|
2,000
|
16"
|
106"
|
40
|
2,350
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 48" x 72"
- Maximum Platform Size: 60" x 96"
- Base Frame: 48" x 72"
|
- Numer of Cylinders: 2
- Motor: 4.8 HP
|
|
Note: The Motor HP for Model DSL-20-072 is 1.5 HP.
|
|
|
|
*Note: Standard platforms only.
Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape
switches will affect overall size. Power requirements depend upon frequency and type of operation
and require specific selection. Standard power supply for .75 and 1.5HP power Unit is 230V/1PH/60hz.
Optional power supply for .75 and 1.15HP Power Unit is 208/230/460/3PH/60Hz . Standard power supply
for 4.8HP power units is 230/460/3PH/60Hz. Optional power supply for 4.8HP power unit is
230V/1PH/60Hz (increases upspeed by 33%).
Note: Where available power supply is 208V/3PH, booster transformers are required for 240V/3PH at
motor, see options. Conforms to or exceeds ANSI standard MH29.1-1994.
|
|
|
DSL Lift Table Options
|
|
Electrical Options
|
|
Up-Down Push Button Station
|
|
Push Button mounted on platform with Disconnect Plug
|
|
Key Operated Up-Down Selector
|
|
Up-Down Push Button with Key Lockout
|
|
Foot Operated Control
|
|
Limit Switch
|
|
Booster Transformers (2 required for 3PH Power Supply)
|
|
Flashing Red Light
|
|
Two Second Up-down Warning Bell with Volume Control
|
|
Electric Toeguards, Tapeswitch
|
|
Momentary contact controls for
automatic up and down operation
with upper and lower limit
switches and Up-Down-Stop Push
Button Control Station
|
|
Photo Electric Cell Leveling
(Unstacking/Stacking-Specify,
1 Direction Only)
|
|
Whisker Switch Leveling
(Unstacking/Stacking-Specify,
1 Direction Only)
|
|
Hydraulic Options
|
|
Manual Down Valve
|
|
Adjustable Flow Control Down Valve
|
|
Larger Power Unit for faster lift speeds
|
|
Remote Power Units with 5'0" hydraulic hose
|
|
Three Phase Power Unit (.75HP or
1.5HP) and Linestarter, Transformer
|
|
Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
|
|
External, Heavy-Duty, Continuous Running
Motor Power Unit with Integral Directional
Valving & Large Capacity Reservoir
|
|
Explosion Proof Power Unit-External
|
|
Quick Disconnect Couplings
|
|
Mechanical Options
|
|
Steel Approach Ramp
|
|
Steel 42" high Handrail with Midrail/Toeboard
|
|
Roll-Up Skirting
|
|
Accordion Bellows Skirts
|
|
Straight Toeguards for surface mounting
|
|
Beveled Toeguards for pit mounting
|
|
Safety Treadplate
|
|
USDA accepted epoxy coatings for Lift Platform
|
|
Stainless Steel Platform Overlay
|
|
Ball Transfer Top
|
|
Conveyor Tops
|
|
Integrally Mounted Floor Lock
|
|
|
