home :: lift tables :: standard :: medium duty :: HLTx :: 36" wide base specifications

ECOA HLT3 36" Wide Base Lift Table Specifications

HLTx Profile | 24" Wide Specifications | 48" Wide Specifications | Request a HLTx Quote
36" Wide Base - 24" Vertical Travel
Model Capacity
(Pounds) 		Edge Loads* Up Speed
(Seconds) 		Cylinder
(Quantity) 		Ship
Weight 		Quote Form
Static Rolling
HLT3-025-24 2500 2500 1675 12 1 700 Quote
HLT3-035-24 3500 3500 2345 16 1 740 Quote
HLT3-045-24 4500 4000 2680 12 2 800 Quote
HLT3-065-24 6500 4500 3015 16 2 850 Quote
The above models have the following in common:
  • Standard Platform Size: 36" x 36"
  • Maximum Platform Size: 60" x 60"
  • Base Frame: 35.5" x 35"
  • Lowered Height: 7.125"
  • Raised Height: 31"
  • Motor**: 1.5HP
Note: Motor HP on Models HLT3-025-24 & HLT3-035-24 is .75 HP

36" Wide Base - 36" Vertical Travel
Model Capacity
(Pounds) 		Edge Loads* Up Speed
(Seconds) 		Cylinder
(Quantity) 		Ship
Weight 		Quote Form
Static Rolling
HLT3-025-36 2500 2500 1675 10 1 800 Quote
HLT3-035-36 3500 3500 2345 14 1 840 Quote
HLT3-045-36 4500 3500 2345 21 2 900 Quote
HLT3-065-36 6500 3500 2345 27 2 950 Quote
The above models have the following in common:
  • Standard Platform Size: 36" x 48"
  • Maximum Platform Size: 60" x 72"
  • Base Frame: 35.5" x 47"
  • Lowered Height: 7.125"
  • Raised Height: 43"
  • Motor**: 1.5HP

36" Wide Base - 48" Vertical Travel
Model Capacity
(Pounds) 		Edge Loads* Up Speed
(Seconds) 		Cylinder
(Quantity) 		Ship
Weight 		Quote Form
Static Rolling
HLT3-025-48 2500 2500 1675 16 1 920 Quote
HLT3-035-48 3500 3500 2345 21 1 980 Quote
HLT3-045-48 4500 3500 2345 32 2 1040 Quote
HLT3-065-48 6500 3500 2345 42 2 1100 Quote
The above models have the following in common:
  • Standard Platform Size: 36" x 64"
  • Maximum Platform Size: 60" x 96"
  • Base Frame: 35.5" x 63"
  • Lowered Height: 7.125"
  • Raised Height: 55"
  • Motor**: 1.5HP

*Note: Standard platforms only. The end and side load capacities must be reduced by 2% for each inch of width or length added to the standard platform size. For higher capacity or larger platform wide base units, contact us.

**Note: The standard 1.5HP power units require 230V/1PH/60Hz power supply. Alternate 208/230/460V,3PH power unit is available. 24'' V.T. only. If available power supply is 115V/1PH, a .75 H.P. power unit is required. This will double the upspeed.