home :: lift tables :: standard :: medium duty :: HLTx :: 48" wide base specifications

ECOA HLT4 48" Wide Base Lift Table Specifications

HLTx Profile | 24" Wide Specifications | 36" Wide Specifications | Request a HLTx Quote
48" Wide Base - 36" Vertical Travel
Model Capacity
(Pounds) 		Edge Loads* Up Speed
(Seconds) 		Cylinder
(Quantity) 		Ship
Weight 		Quote Form
Static Rolling
HLT4-025-36 2500 2500 1675 10 1 840 Quote
HLT4-035-36 3500 3500 2345 14 1 880 Quote
HLT4-045-36 4500 3500 2345 21 2 940 Quote
HLT4-065-36 6500 3500 2345 27 2 990 Quote
The above models have the following in common:
  • Standard Platform Size: 48" x 48"
  • Maximum Platform Size: 72" x 72"
  • Base Frame: 47.5" x 47"
  • Lowered Height: 7.125"
  • Raised Height: 43"
  • Motor**: 1.5HP

48" Wide Base - 48" Vertical Travel
Model Capacity
(Pounds) 		Edge Loads* Up Speed
(Seconds) 		Cylinder
(Quantity) 		Ship
Weight 		Quote Form
Static Rolling
HLT4-025-48 2500 2500 1675 16 1 960 Quote
HLT4-035-48 3500 3500 2345 21 1 1020 Quote
HLT4-045-48 4500 3500 2345 32 2 1080 Quote
HLT4-065-48 6500 3500 2345 42 2 1140 Quote
The above models have the following in common:
  • Standard Platform Size: 48" x 64"
  • Maximum Platform Size: 72" x 96"
  • Base Frame: 47.5" x 63"
  • Lowered Height: 7.125"
  • Raised Height: 55"
  • Motor**: 1.5HP

48" Wide Base - 60" Vertical Travel
Model Capacity
(Pounds) 		Edge Loads* Up Speed
(Seconds) 		Cylinder
(Quantity) 		Ship
Weight 		Quote Form
Static Rolling
HLT4-025-60 2500 2500 1675 32 2 1425 Quote
HLT4-035-60 3500 3500 2345 32 2 1525 Quote
HLT4-045-60 4500 3500 2345 42 2 1900 Quote
HLT4-065-60 6500 3500 2345 42 2 2025 Quote
The above models have the following in common:
  • Standard Platform Size: 48" x 88"
  • Maximum Platform Size: 72" x 108"
  • Base Frame: 47.625" x 83"
  • Lowered Height: 8"
  • Raised Height: 68"
  • Motor**: 1.5HP

*Note: Standard platforms only. The end and side load capacities must be reduced by 2% for each inch of width or length added to the standard platform size. For higher capacity or larger platform wide base units, contact us.

**Note: The standard 1.5HP power units require 230V/1PH/60Hz power supply. Alternate 208/230/460V,3PH power unit is available. 24'' V.T. only. If available power supply is 115V/1PH, a .75 H.P. power unit is required. This will double the upspeed.