|
|
|
|
ECOA HLTx Series Hydraulic Lift Tables
|
|
|
|
ECOA's HLTx Series Lift Tables are high-speed electrohydraulic scissor lifts with capacities of 2,500 to
6,500 lbs., Vertical Travel distances of 24 in., 36 in., 48 in., and 60 in.(specific models).
Base frame widths: HLT2 = 23.5", HLT3 =35.5" and HLT4 = 47.5". Maximum platform widths: HLT2 = 48", HLT3 =
60" and HLT4 = 72". The scissor leg rollers, both top and bottom, are entrapped within
the structure of the platform and base frame to ensure maximum unit stability on all four sides.
All ECOA Lift Tables are designed and constructed for heavy-duty applications under the toughest working
conditions, offering years of trouble-free operation.
|
Click on image for larger picture
|
|
Features of HLTx Series
|
|
|
|
|
|
Hinged safety
maintenance bars.
|
Entrapped rollers
|
Optional PLC
operated power unit.
|
Contoured Scissor Legs
|
Standard Features Include:
|
- Single-acting cylinders with positive internal stops are fastened at the rod end sleeve with
removable axles for enhanced maintainability
- Heavy-duty welded construction designed with a 3-to-1 safety factor, complies
with ANSI MH29.1-1994
- PTFE (Teflon) lined, composite bearings at all wear points. Hardened chrome plated axles
used at all bearing surfaces.
- Scissor Legs bolted to base frame and platform at fixed (clevis) end, for enhanced maintainability
and ease of disassembly, if required.
- 1.5HP, 230V-460V/3PH or 230V/1PH integral power unit. Optional 1.5HP, 115V/1PH power
unit available.
- Optional Programmable Logic Controller (PLC) operates integral power unit and enables a wide
array of plug & play options.
- Smooth steel tops
- Includes hydraulic oil
|
- HLTx Lifts have the scissor leg roller entrapped within the base frame and platform for superior
stability
- Hinged safety maintenance bars.
- Surfaces degreased, oxide primed and finished with two coats of durable enamel.
- Safety striping and warning decals meet or exceed OSHA requirements.
- Contoured Scissor Legs
- 24V operating control voltage
- NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN"
pushbutton control station with 8 ft. straight cord
- 10 ft. power cord (connector not included)
- Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
- Internal high-pressure gear pump with check valve, relief valve, pressure-compensated
flow control valve, solenoid valve, suction and return filters
|
|
|
HLT2 24" Wide Base Specifications
|
|
|
|
24" Wide Base - 24" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Up Speed
(Seconds)
|
Cylinder
(Quantity)
|
Ship
Weight
|
Quote Form
|
|
Static
|
Rolling
|
|
HLT2-025-24
|
2500
|
2500
|
1675
|
12
|
1
|
560
|
Quote
|
|
HLT2-035-24
|
3500
|
3500
|
2345
|
16
|
1
|
640
|
Quote
|
|
HLT2-045-24
|
4500
|
4000
|
2680
|
12
|
2
|
695
|
Quote
|
|
HLT2-065-24
|
6500
|
4500
|
3015
|
16
|
2
|
795
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 24" x 36"
- Maximum Platform Size: 48" x 60"
- Base Frame: 23.5" x 35"
|
- Lowered Height: 7.125"
- Raised Height: 31"
- Motor**: 1.5HP
|
|
Note: Motor HP on Models HLT2-025-24 & HLT2-035-24 is .75HP
|
|
|
24" Wide Base - 36" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Up Speed
(Seconds)
|
Cylinder
(Quantity)
|
Ship
Weight
|
Quote Form
|
|
Static
|
Rolling
|
|
HLT2-025-36
|
2500
|
2500
|
1675
|
10
|
1
|
660
|
Quote
|
|
HLT2-035-36
|
3500
|
3500
|
2345
|
14
|
1
|
700
|
Quote
|
|
HLT2-045-36
|
4500
|
3500
|
2345
|
21
|
2
|
795
|
Quote
|
|
HLT2-065-36
|
6500
|
3500
|
2345
|
27
|
2
|
895
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 24" x 48"
- Maximum Platform Size: 48" x 72"
- Base Frame: 23.5" x 47"
|
- Lowered Height: 7.125"
- Raised Height: 43"
- Motor**: 1.5HP
|
|
|
24" Wide Base - 48" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Up Speed
(Seconds)
|
Cylinder
(Quantity)
|
Ship
Weight
|
Quote Form
|
|
Static
|
Rolling
|
|
HLT2-025-48
|
2500
|
2500
|
1675
|
16
|
1
|
805
|
Quote
|
|
HLT2-035-48
|
3500
|
3500
|
2345
|
21
|
1
|
1050
|
Quote
|
|
HLT2-045-48
|
4500
|
3500
|
2345
|
32
|
2
|
1070
|
Quote
|
|
HLT2-065-48
|
6500
|
3500
|
2345
|
42
|
2
|
1175
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 24" x 64"
- Maximum Platform Size: 48" x 96"
- Base Frame: 23.5" x 63"
|
- Lowered Height: 7.125"
- Raised Height: 55"
- Motor**: 1.5HP
|
|
*Note: Standard platforms only. The end and side load capacities must be reduced by 2% for
each inch of width or length added to the standard platform size.
For higher capacity or larger platform wide base units,
contact us.
**Note: The standard 1.5HP power units require 230V/1PH/60Hz power supply. Alternate
208/230/460V,3PH power unit is available. 24'' V.T. only. If available power supply is 115V/1PH,
a .75 H.P. power unit is required. This will double the upspeed.
|
|
|
HLTx Series Lift Table Options
|
|
Electrical Options
|
|
Up-Down Push Button Station
|
|
Push Button mounted on platform with Disconnect Plug
|
|
Key Operated Up-Down Selector
|
|
Up-Down Push Button with Key Lockout
|
|
Foot Operated Control
|
|
Limit Switch
|
|
Booster Transformers (2 required for 3PH Power Supply)
|
|
Flashing Red Light
|
|
Two Second Up-down Warning Bell with Volume Control
|
|
Electric Toeguards, Tapeswitch
|
|
Momentary contact controls for automatic up and down operation with upper and lower limit
switches and Up-Down-Stop Push Button Control Station
|
|
Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
|
|
Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
|
|
Hydraulic Options
|
|
Manual Down Valve
|
|
Adjustable Flow Control Down Valve
|
|
Larger Power Unit for faster lift speeds
|
|
Remote Power Units with 5'0" hydraulic hose
|
|
Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
|
|
Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
|
|
External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional
Valving & Large Capacity Reservoir
|
|
Explosion Proof Power Unit-External
|
|
Quick Disconnect Couplings
|
|
Mechanical Options
|
|
Steel Approach Ramp
|
|
Steel 42" high Handrail with Midrail/Toeboard
|
|
Roll-Up Skirting
|
|
Accordion Bellows Skirts
|
|
Outboard Mounting of Casters w/Standard Lowered Height
|
|
Straight Toeguards for surface mounting
|
|
Beveled Toeguards for pit mounting
|
|
Safety Treadplate
|
|
USDA accepted epoxy coatings for Lift Platform
|
|
Stainless Steel Platform Overlay
|
|
Ball Transfer Top
|
|
Conveyor Tops
|
|
(2) Retractable Wheels and (2) Wheel Dolly Jack to 6,500 lbs. Steel Wheels
|
|
(2) Fixed Wheels and (2) Wheel DollyJack to 12,000 lbs. Steel Wheels
|
|
(4) "V" Groove, or Single Flanged Steel Wheels or (2) combined with (2) Flat Steel
Wheels, Mounted off sides or ends.
|
|
(2) Fixed and (2) Swivel Wheels
|
|
Integrally Mounted Floor Lock
|
|
|
