|
|
|
|
ECOA LifTilt CLTLT Series Lift and Tilt Tables
|
|
|
|
ECOA CLTLT Series Hydraulic SpaceSaver Lift and Tilt Tables are heavy-duty electrohydraulic tables with
capacities of 2,000 to 6,000 lbs., angle of tilt to 45 degrees with platform sizes of 24 x 48
to 48 x 60 in.
The SpaceSaver lifts and tilts within its own base frame, allowing the tilt operation to work within a
minimum of floor area for maximum efficiency. The hydraulic system is powered up and down utilizing double
acting cylinders. The leg rollers are entrapped within the base and platform frame to ensure
maximum stability.
|
Click on image for larger picture
|
|
Features of The CLTLT Series
|
- Base and platform leg rollers are entrapped within the channel frame for maximum stability.
- Internally-mounted .75HP, 115/230V, 1PH, 60Hz, or 208/230/460V, 3PH, 60 Hz
intermittent duty TENV super torque motor. Specify voltage required. If
115V, 1PH, 60Hz voltage is required, a 20 amp circuit is necessary.
- 24 V operating control voltage
- NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN"
Pushbutton box with 8 ft. straight cord
- NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical
connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
- 10 ft. power cord (connector plug not included)
- 12 in. high lip on pivot end
|
- Double-acting hydraulic cylinders
- Smooth steel tops with 3.75 in. straight safety toeguards with black and yellow safety stripes on
toeguards
- Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
- Surfaces degreased, oxide primed and finished with two coats of enamel
- Lifetime self-lubricating, antifriction bearings at all pivot points
- Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control
valve, solenoid valve, suction and return filters
- Includes hydraulic oil
|
|
|
LifTilt CLTLT Specifications
|
|
45° Tilt
|
|
Model
|
Capacity
(Pounds)
|
Up Speed
(Seconds)
|
Cylinder
(Quantity)
|
Ship
Weight
|
Quote Form
|
|
CLTLT-02-45
|
2,000
|
15
|
1
|
675 lbs.
|
Quote
|
|
CLTLT-04-45
|
4,000
|
22
|
1
|
725 lbs.
|
Quote
|
|
CLTLT-06-45
|
6,000
|
32
|
2
|
800 lbs.
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 24" x 48"
- Maximum Platform Size: 48" x 60"
- Base Frame: 22.5" x 47"
|
- Lowered Height: 10"
- Rasied Height: 24.375"
- Motor: .75HP
|
|
|
The standard unit comes equipped with smooth top deck, straight toeguards and 12 lip.
The standard .75HP Power Units are internal and power supply 115/230V, 1PH, 60Hz. Specify voltage
required. If 115V, 1PH, 60Hz. voltage is required, a 20 amp circuit is necessary. Units are powered
up and down with double acting cylinders. The leg rollers are entrapped within the base frame to
ensure maximum unit stability. The SpaceSaver tilts within its own base frame, allowing the tilt
operation to work in a minimum floor area for maximum efficiency.
|
|
|
|
