ECOA TSL Series Triple Scissors Hydraulic Lift Tables
|
|
|
|
ECOA TSL Series Lift Tables are high travel triple electro-hydraulic scissor lifts with
capacities of 3,000 to 6,000 lbs., travel distances of 72 to 216 in. with platform sizes of 30 x 42
to 84 x 144 in.
All ECOA Lift Tables are designed and constructed for heavyduty applications under the toughest
working conditions, offering years of trouble-free operation.
|
Click on image for larger picture
- All controller components are UL and/or CSA approved
- Straight toeguards with yellow and black safety stripes
- 24V operating control voltage
- Mechanical upper travel stops
|
|
Features of TSL Series
|
- Smooth steel tops
- On 4.8HP units, manifold with check valve, relief valve, pressure-compensated flow
control valve, solenoid valve, suction and return filters. On 1.5HP or 3HP power units, valves are
internally mounted on gear pump
- NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN"
push button control station with 20 ft. coil cord
- NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical
connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
- Internally-mounted 1.5HP, 230V, 1PH, 60Hz TENV intermittent duty super torque
motor or externally-mounted 3 or 4.8HP, 230/460V, 3PH, 60Hz continuous duty motor
- High-pressure gear pump
- Hydraulic flow limiter valve at the base of each cylinder
- Optional upper travel limit switch
- Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
- Lifetime self-lubricating, PTFE lined, composite bearings at all pivot points
- 10 ft. power cord, connector not included (For internal power unit only)
- Safety restraint maintenance bars
|
|
|
TSL Specifications
|
|
|
|
72" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Height
|
Up Speed
(Seconds)
|
Ship*
Weight
|
Quote Form
|
|
Static
|
Rolling
|
Lowered
|
Raised
|
|
TSL-30-072
|
3,000
|
1,500
|
1,000
|
14.25"
|
86.25"
|
22
|
2,100
|
Quote
|
|
TSL-60-072
|
6,000
|
3,000
|
2,000
|
21.25"
|
93.25"
|
40
|
2,500
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 30" x 42"
- Maximum Platform Size: 48" x 66"
- Base Frame: 30" x 42"
|
- Numer of Cylinders: 1
- Motor: 1.5HP
|
|
Note: The Number of Cylinders for Model TSL-60-072 is 2.
|
|
|
96" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Height
|
Up Speed
(Seconds)
|
Ship*
Weight
|
Quote Form
|
|
Static
|
Rolling
|
Lowered
|
Raised
|
|
TSL-30-096
|
3,000
|
1,500
|
1,000
|
14.25"
|
110.25"
|
30
|
2,400
|
Quote
|
|
TSL-60-096
|
6,000
|
3,000
|
2,000
|
21.25"
|
117.25"
|
50
|
2,850
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 30" x 48"
- Maximum Platform Size: 48" x 72"
- Base Frame: 30" x 48"
|
- Numer of Cylinders: 1
- Motor: 1.5HP
|
|
Note: The Number of Cylinders for Model TSL-60-096 is 2.
|
|
|
120" Vertical Travel
|
|
Model
|
Capacity
(Pounds)
|
Edge Loads*
|
Height
|
Up Speed
(Seconds)
|
Ship*
Weight
|
Quote Form
|
|
Static
|
Rolling
|
Lowered
|
Raised
|
|
TSL-30-120
|
3,000
|
1,500
|
1,000
|
14.25"
|
134.25"
|
40
|
2,550
|
Quote
|
|
TSL-60-120
|
6,000
|
3,000
|
2,000
|
21.25"
|
141.25"
|
80
|
3,000
|
Quote
|
The above models have the following in common:
- Standard Platform Size: 30" x 60"
- Maximum Platform Size: 48" x 84"
- Base Frame: 30" x 60"
|
- Numer of Cylinders: 2
- Motor: 1.5HP
|
|
Note: Motor HP on Model TSL-60-120 is 3 HP.
|
|
|
|
*Note: Standard platforms only.
Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape
switches will affect overall size. Power requirements depend upon frequency and type of operation
and require specific selection. 1.5HP Power Units are internal as standard equipment. 3HP
and 4.8HP Power Units are remote as standard equipment. Standard power supply for 1.5HP Power Unit
is 230V/1PH/60Hz. Optional power supply for 1.5HP Power Unit is 208/230/460/3PH/60Hz. 115V/1PH/60Hz.
Power Supply requires a 20 amp circuit. Standard power supply required for 3 and 4.8HP is
230/460/3PH/60Hz. Optional power supply for 3 and 4.8HP Power Units is 230/1PH/60 Hz
(increases upspeed by 33%).
Note: Where available power supply is 208V/3PH, booster transformers are required for 240V/3PH for
3HP and 4.8HP motors, see options. Conforms to or exceeds ANSI standard MH29.1-1994.
|
|
|
TSL Lift Table Options
|
|
Electrical Options
|
|
Up-Down Push Button Station
|
|
Push Button mounted on platform with Disconnect Plug
|
|
Key Operated Up-Down Selector
|
|
Up-Down Push Button with Key Lockout
|
|
Foot Operated Control
|
|
Limit Switch
|
|
Booster Transformers (2 required for 3PH Power Supply)
|
|
Flashing Red Light
|
|
Two Second Up-down Warning Bell with Volume Control
|
|
Electric Toeguards, Tapeswitch
|
|
Momentary contact controls for
automatic up and down operation
with upper and lower limit
switches and Up-Down-Stop Push
Button Control Station
|
|
Photo Electric Cell Leveling
(Unstacking/Stacking-Specify,
1 Direction Only)
|
|
Whisker Switch Leveling
(Unstacking/Stacking-Specify,
1 Direction Only)
|
|
Hydraulic Options
|
|
Manual Down Valve
|
|
Adjustable Flow Control Down Valve
|
|
Larger Power Unit for faster lift speeds
|
|
Remote Power Units with 5'0" hydraulic hose
|
|
Three Phase Power Unit (.75HP or
1.5HP) and Linestarter, Transformer
|
|
Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
|
|
External, Heavy-Duty, Continuous Running
Motor Power Unit with Integral Directional
Valving & Large Capacity Reservoir
|
|
Explosion Proof Power Unit-External
|
|
Quick Disconnect Couplings
|
|
Mechanical Options
|
|
Steel Approach Ramp
|
|
Steel 42" high Handrail with Midrail/Toeboard
|
|
Roll-Up Skirting
|
|
Accordion Bellows Skirts
|
|
Straight Toeguards for surface mounting
|
|
Beveled Toeguards for pit mounting
|
|
Safety Treadplate
|
|
USDA accepted epoxy coatings for Lift Platform
|
|
Stainless Steel Platform Overlay
|
|
Ball Transfer Top
|
|
Conveyor Tops
|
|
Integrally Mounted Floor Lock
|
|
|
