|
|
|
|
Lift Products G-Series Lift Tables
|
|
|
|
The G-Series Lift Tables have been designed as an economical solution for light duty applications.
Available with 2,000 & 3,000 lb. capacities, The G-Series table can improve productivity and reduce
injuries by placing loads at an ergonomic work height. The heavy duty 1.7 HP lift motor allows up to
12 full lifts per hour on average, with a competitive lift speed and runs on a 115 volt input 15 amp
circuit. Available in 4 models, The G-Series has the right table for many applications. The G-Series
tables are stock items and can usually ship in 24 hours.
The 3G-Series Lift Tables features a 2 lift cylinder for increased capacity and has the same standard
features as the 2G models.
|
Click on image for larger picture
|
|
Features of the G-Series
|
|
Full Perimeter Safety Bar
The full perimeter bar stops the table from lowering if it comes in contact with any obstruction.
This feature improves safety when the table is used next to machinery, packing tables, work
benches or other items when the table could cause entrapment while lowering. To reactivate the table
the operator must reset the button on the control box.
|
|
Built In Maintenance Bar
The Table includes built-in Flip Down Bars on each side of the outer scissors arms.
These bars are to be flipped down while performing maintenance or inspection.
|
|
Exclusive 1.7 HP Motor
This intentionally oversized motor performs at a competitive lift speed with low amp draw.
The high torque low RPM (1,700) lift motor is ETL-Rated. This 1.7 HP motor is energy efficient,
can run on a standard 15 amp circuit, and also features a very quiet operation.
|
Standard Features Include:
|
- Upper Platform Full Perimeter Safety which prevents descent upon contact with an obstruction
- Low Tension (24v) control box with up and down buttons. In addition, The G-Series includes an
electric circuit reset button in case safety perimeter bar is activated
- Upper limit switch shuts motor off at full height extension reducing wear on lift cylinder and motor
|
- Single acting lift cylinder with flow control to prevent fast lowering in case of hose burst
- Lifetime lubricated bearings on lift arms
- 1.7 HP 115 volt motor with low amp draw and reliable performance
- Runs on a standard 15 amp circuit
|
|
|
G-Series Specifications
|
|
Model
|
Capacity
|
Platform
Size
|
Base
Size
|
Lowered
Height
|
Raised
Height
|
Lift
Speed
|
Lowered
Speed(Empty)
|
Motor
|
Ship
Weight
|
Quote
Form
|
|
2G-2849
|
2,000 lbs
|
28" x 49"
|
24.75" x 46"
|
8"
|
40"
|
18.5 sec
|
17.6 sec
|
1.7 HP
|
400 lbs
|
Quote
|
|
2G-3849
|
2,000 lbs
|
38" x 49"
|
24.75" x 46"
|
8"
|
40"
|
18.5 sec
|
17.6 sec
|
1.7 HP
|
425 lbs
|
Quote
|
|
3G-3049
|
3,000 lbs
|
30" x 49"
|
29.25" x 45"
|
8"
|
40"
|
28 sec
|
33 sec
|
1.7 HP
|
530 lbs
|
Quote
|
|
3G-3849
|
3,000 lbs
|
38" x 49"
|
29.25" x 45"
|
8"
|
40"
|
28 sec
|
33 sec
|
1.7 HP
|
550 lbs
|
Quote
|
|
|
|
G-Series Options
|
|
|
