Exclusive Auto-Transition Plate is a key feature of the Lift-N-Spin. This Auto-Transition Plate provides a smooth surface from the ramp onto the rotating top. Once the lift is raised 1/4" the Auto-Transition Plate automatically lowers to allow the spinning of the rotating top. When the table is fully lowered the Auto-Transition Plate automatically raises again to provide a smooth surface to load the next pallet.

With a lowered height of only 4-1/4", The Lift-N-Spin can be loaded with a manual or electric pallet truck.

The optional loading ramp comes in 3 standard sizes: 36", 42", or 48". Custom ramp sizes are available.

Standard Features Include:

• Upper platform fitted with safety perimeter, which prevents descent on contact with obstructions.
• Low-tension (24V) control box with up-down buttons. In addition the "Guardian" Series includes an electric circuit reset button in case the safety perimeter is actuated.
• New design external power pack equipped with a relief valve against overloading and a compensated flow valve for controlling lowering speed. The power pack is supplied with hoses 8' long.
• 115 voltage single phase standard . 230/460 voltage three phase is available as an option.
• Upper limit switch.

• Single acting cylinders with drainage system and check valve to stop the lift table lowering in case of hose burst.
• Safety clearance between scissors to prevent trapping during operations.
• Mechanical blocks for safe maintenance operations.
• Self-lubricating bushings on pivot points.
• Removable lifting eye(s) to facilitate handling and installation of the lift table.
• Motor 1 HP.