|
Hydraulic / Actuation Options
|
|
Larger Power Units - Higher horsepower motors and hydraulics used to increase travel speed.
|
|
External Power Unit - Power unit is connected to lift only by hydraulic hoses.
|
|
Cross Check Valving - Locks oil in cylinders to eliminate deflection caused by oil transfer.
Used in certain side loading applications.
|
|
Power Units Full JIC Style Continuous Running Power Units - Continuous running power unit built
to JIC specifications.
|
|
No Coast Valving - Fast acting hydraulic valving, which decreases upward coast, for use where
more precise positioning is desired.
|
|
Minimum Downdrift Valving - Near positive shut-off valving for use where platform must maintain
position for extended periods of time.
|
|
Continuous Running Power Units - Heavy-duty power units with special cooling features. Power unit runs
continuously, and valves are actuated to activate lift. Used for extremely high jogs or cycles.
|
|
Double Acting Cylinders - For special applications where it is necessary to provide both power
up and power down.
|
|
Hot and Cold Temperature Hydraulic Packaging - Special sealing and hydraulic fluids for use in hot or
cold atmospheres.
|
|
Velocity Fuse(s)/Excess Flow Protectors - Hydraulic control prevents table free fall in the
unlikely event of massive hydraulic failure.
|
|
Electronic Control Options
|
|
Wall Mounted Push Button - Permanent wall mounted controls for use where a fixed operating station
is desirable.
|
|
Automatic Leveling Package - Optical sensing control positions table and stops travel at any preset height.
|
|
Maintained Contact Controls - Up/down/emergency stop push button control which stops travel automatically
at preset level. (Control button does not have to be held.)
|
|
Electrical Quick Disconnect - Quick disconnect plugs for use with portable or frequently relocated lifts.
|
|
Special NEMA Rated Electrical Packages - A variety of electrical packages designed to
meet NEMA standards for outdoor, explosion proof, and other installation requirements.
|
|
Visual or Audible Signals - Lights or bells used to warn personnel when lift is in operation.
|
|
Travel Limit Switch(es) - Electrical switch stops travel, prevents overtravel, provides height positioning,
and can activate associated equipment. Should be used with mechanical stop for fixed lowered height.
|
|
One-Touch Auto Leveling - Increase productivity in repositioning applications. Raise or lower lifts
a specific increment at the touch of a button
|
|
Mechanical Options
|
|
Narrow Base - Reduced width base to fit special needs. Must be lagged for stability.
|
|
Wide Base - Increased width base provides extra stability for wider loads.
|
|
Sub Bases - Extra base unit increases low height of standard designs. Provides a positive stop at
predetermined down level. Frequently used for integration with automated systems.
|
|
Lifting Eyes - Steel eye bolts allow table to be lifted with hoist. Frequently used in pit
mounted applications for ease of installation and maintenance.
|
|
Lag Plates - Permanently attached plates or angles with bolt holes for lagging tables to floor.
|
|
Increased Roll Over Capacity - Structural strengthening of table support for use in pit installations
where loaded trucks or transporters must traverse the platform in its lowered position.
|
|
Platform Options
|
|
Access Plate - Removable or hinged plate in platform surface allows access to power unit and
hydraulics when lift is in lowered position.
|
|
Anti-skid Platform Surfaces - Diamond tread platform surface or abrasive type paint provide better
traction for powered vehicles and reduce danger of personnel slipping.
|
|
Vee Cradle Platform - Vee shaped platform provides centering and secure handling of cylindrical loads,
such as rolls.
|
|
Fork Pockets - Structural fork pockets allow entire unit to be lifted and moved by fork truck.
|
|
Stainless Steel Platform - Corrosion and damage resistant surface for use with corrosive materials or where
frequent wash down is required.
|
|
Wheel Chock - Counter-weighted wheel chock recessed in table top. Automatically engages as lift
raises and prevents wheeled vehicle from rolling in set direction.
|
|
End-Shifting Platform - Manual or powered platform end-shift used to align loads with other handling
systems or operating equipment.
|
|
Ball Transfer Top - Fixed or retractable ball conveyors for omnidirectional movement of load on platform.
|
|
Fixed and Removable - Handrails with Snap Chain For use in applications involving personnel
lifting. Removable rails allow access from any side when lift is not in use.
|
|
Bevel Toeguard - 30° bevel on platform sides provides warning contact without abrupt shear point
when lift table is installed in pit.
|
|
Gravity or Powered Conveyor Tops - Roller conveyor tops for integration with other handling equipment
or systems.
|
|
Throw-Over Plates - Hinged plates used to provide a bridge between the platform surface and an
adjacent fixed height surface.
|
|
Bellows Accordion Skirting - Single-ply stitched polyester skirting covers mechanism between platform
and base. Also available as boots to cover cylinders only.
|
|
Toe Sensing Edge - Automatically reverses lift on contact with any obstruction.
|
|
Environmental Options
|
|
Export Boxing - Meets special packaging and shipping requirements for export out of the United States.
|
|
Special Paint - Customer specified paint formulations and colors. Corrosion Protection similar to that
of Hot Dip Galvanizing.
|
|
Cam Follower Rollers - Low friction leg rollers for increased efficiency and longer operating life.
|
|
High Duty Cycle and Greased Manifolds - Special bearing packages and regreasable pivot points for
moderately high and high duty cycle applications.
|
