Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : pneumatic : tilting : autoquip : air force lift tilt

Air Force Lift & Tilt

Autoqip Air Force Lift Tilt

Autoquip Air Force Lift & Tilt Tables

Autoquip Air Force Lift and Tilt Tables are driven by heavy industrial pneumatic air bag actuators, and because they are completely air powered, not susceptible to the oil leaks or spills associated with hydraulic units. Operators can adjust loads vertically and in degree of tilt to keep small parts or other items within reach as a bin & basket, or pallet is loaded or unloaded. This reduces exposure to back injury by keeping the work in the operator's ergonomic "power zone" which improves employee productivity and greater work quality.

Common settings for completely air-powered industrial lift & tilt combinations include explosion-proof environments, food processing plants, or areas where it is more economical to power the units using shop air supply rather than single or three-phase electrical power.
Ships From:
US Map Oklahoma
Made By:
Autoquip Logo
Request Quote
Air Force Lift & Tilt Specifications
Max Operating
24AFT3024"3,000 lbs30°15.75"49.25"48" X 48"36" X 60"80 PSI3.375"1,100 lbsQuote
  • Built-in Air Damper reduces "bounce" inherent in most pneumatic tilters as the platform lowers under load.
  • Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
  • Minimum 1/4-inch-thick steel platform minimizes deck deflection and maximizes load stability.
  • Solid steel legs and added stiffeners provide overall stability and straight, repeatable roller tracking.
  • Structural steel support in upper and lower frames provide additional rigidity.
  • Autoquip offers an industry-best 2 year warranty on all parts.
  • On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
  • Maintenance-free bearings at pivot points require no lubrication.
  • Heavy duty Firestone air bag actuators provide many years or reliable, maintenance-free service.
  • Air bag actuators and lift rollers are easily replaced, minimizing downtime.
  • Built-in fork truck pockets allow the lift to be easily relocated and shared between work stations.
  • Simply connect shop air supply using the quick-disconnect air fitting to begin using.
  • Exceptionally low lowered height allows greater on and off load flexibility and increases total ergonomic range.
  • Fixed flow control mounted directly to the air actuator controls the descent of the lift platform.
  • Base rollers are captured for improved load stability and operator safety.
  • Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
  • Compliance with recognized standards:
    • ANSI MH29.1 - Safety Requirements for Industrial Scissors Lifts
    • NFPA 70 - National Electric Code
    • ASTM - A36 - Structural Steel Standard
    • ANSI Z535 - Safety Labeling Requirements
    • AWS D.1 - Welding Standards
    • Applicable portions of OSHA 29CFR1910 - General workplace safety

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:
  • Larger Platform Sizes
  • Accordion Skirts
  • 4-way Non-skid Tread Plate
  • "V" Deck
  • Beveled Toe Guards
  • Stainless Steel Platform
  • Stainless Steel Skin
Paint Options:
  • Black, Brown, Machinery Grey, Blue
  • Match Color
  • Safety Colors: Orange or Yellow
  • Epoxy Paint
  • Steel-it
  • Primer Only
  • Tile Clad Epoxy
Baseframe Accessories:
  • Anchor Clips
  • Built Up Baseframe
  • Fork Truck Pockets
Power Unit Options:
  • Hand Operated Controls
Gates & Enclosures
  • Single Swing Gates
  • Biparting Swing Gates
  • Single Panel Vertical Acting Gates
  • Bi Panel Vertical Acting Gates
  • Horizontal Sliding Gates
  • Panels (standard 96" high)
  • Interlocks
Related Product Lines
Southworth GLTA
Southworth GLTA Type:Air : Tilting
Capacity:2,000 - 4,000 lbs
Down Height:14.5" - 15"
Up Height:38.5" - 39"
Min Platform:28" x 42"
Max Platform:60" x 60"
Herkules A1050T
Herkules A1050T Type:Air : Tilting
Capacity:1,000 - 3,000 lbs
Down Height:14.375"
Up Height:39.375"
Min Platform:36" x 48"
Max Platform:48" x 48"
Presto AXST
Presto AXST Type:Air : Tilting
Capacity:2,000 - 8,000 lbs
Travel:23" - 24"
Down Height:19" - 20"
Up Height:43"
Min Platform:36" x 48"
Max Platform:48" x 60"
Presto AXT
Presto AXT Type:Air : Tilting
Capacity:1,000 - 4,000 lbs
Travel:21" - 24"
Down Height:15"
Up Height:36" - 39"
Min Platform:36" x 48"
Max Platform:48" x 60"
Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Products
View all products of this category View Products
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2018 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: Google+