Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : multi-stage : ecoa : qsl

ECOA QSL Lifts

ECOA QSL

ECOA QSL Series Quadruple Scissors Hydraulic Lift Tables

ECOA QSL Series Lift Tables are high travel quadruple-height electro-hydraulic scissor lifts with capacities of 3,000 to 6,000 lbs., travel distances of 240 to 288 in. with platform sizes of 60 x 96 to 84 x 144 in.

All ECOA Lift Tables are designed and constructed for heavyduty applications under the toughest working conditions, offering years of trouble-free operation.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
ModelTravelCapacityHeightPlatform SizeBase
Frame
Edge Loads*Lift
Speed
CylindersMotorShip
Weight*
Quote
Form
MINMAXSTDMAXStaticRolling
QSL-30-240240"3,000 lbs54"294"60" x 96"84" x 120"60" x 93"1,500 lbs1,000 lbs70 sec25 HP7,500 lbsQuote
QSL-60-240240"6,000 lbs54"294"60" x 96"84" x 120"60" x 93"3,000 lbs2,000 lbs85 sec25 HP9,000 lbsQuote
QSL-30-288288"3,000 lbs68"356"60" x 120"84" x 144"60" x 112"1,500 lbs1,000 lbs95 sec25 HP8,000 lbsQuote
QSL-60-288288"6,000 lbs68"356"60" x 120"84" x 144"60" x 112"3,000 lbs2,000 lbs120 sec25 HP1,0850 lbsQuote

*Note: Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection. Standard power supply required for 5HP is 230/460/3PH/60Hz. Optional power supply for 5HP power units is 230V/1PH/60Hz (increases upspeed by 33%).

Note: Where available power supply is 208V/3PH, booster transformers are required for 240V/3PH at motor, see options. Conforms to or exceeds ANSI standard MH29.1-1994.

  • Smooth steel tops
  • Straight toeguards with yellow and black safety stripes
  • Externally-mounted 5HP, 230/460V, 3PH, 60Hz continuous duty motor
  • Manifold with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
  • NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" push button control station with 20 ft. coil cord
  • NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
  • All controller components are UL and/or CSA approved
  • 24V operating control voltage
  • Hydraulic flow limiter valve at the base of each cylinder
  • Upper travel limit switch
  • Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
  • Lifetime self-lubricating, PTFE lined, composite bearings at all pivot points
  • Safety restraint maintenance bars
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • Mechanical upper travel stops
  • High-pressure gear pump
  • Includes hydraulic oil

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
  • Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
  • Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
  • Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • Remote Power Units with 5'0" hydraulic hose
  • Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
  • Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options:
  • Steel Approach Ramp
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Skirting
  • Accordion Bellows Skirts
  • Straight Toeguards for surface mounting
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • USDA accepted epoxy coatings for Lift Platform
  • Stainless Steel Platform Overlay
  • Ball Transfer Top
  • Conveyor Tops
  • Integrally Mounted Floor Lock
Related Product Lines
ECOA DSL
ECOA DSL Type:Double High
Capacity:2,000 - 6,000 lbs
Travel:60" - 144"
Down Height:10.25" - 18"
Up Height:70" - 162"
Min Platform:30" x 48"
Max Platform:72" x 132"
Vestil EHLTD
Vestil EHLTD Type:Double High
Capacity:1,000 - 5,000 lbs
Travel:60" - 72"
Down Height:10" - 12"
Up Height:70" - 84"
Min Platform:34" x 48"
Max Platform:48" x 72"
ECOA TSL
ECOA TSL Type:Double High
Capacity:3,000 - 6,000 lbs
Travel:72" - 216"
Down Height:14.25" - 54"
Up Height:86.25" - 270"
Min Platform:30" x 42"
Max Platform:84" x 144"
Southworth LSH5-60
Southworth LSH Type:Double High
Capacity:2,000 - 12,000 lbs
Travel:60" - 144"
Down Height:12.5" - 24"
Up Height:74" - 168"
Min Platform:20" x 53"
Max Platform:42" x 108"
Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Products
View all products of this category View Products
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2016 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: Google+