Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : multi-stage : double high : vestil : ehltd

Vestil EHLTD Lifts

Vestil EHLTD

Vestil EHLTD Double Scissor Lift Table

Achieve the extra reach you're looking for with our Double Scissor Lift Tables. These full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.

Safety features include: electric toe guard to protect pinch points during lowering of the table, velocity fuse to stop falling due to loss of hydraulic pressure, 24VAC push-button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height reducing motor wear. 2 HP, 460V, 3-phase, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating.
Ships From:
US Map Indiana
Made By:
Vestil Logo
Request Quote
ModelTravelCapacityHeightPlatform SizeLift
EHLTD-1-6060"1,000 lbs10"70"34" x 48"48" x 72"7 sec2 HP460/3/601,470 lbsQuote
EHLTD-1-7272"1,000 lbs12"84"34" x 64"48" x 88"10 sec2 HP460/3/601,576 lbsQuote
EHLTD-2-6060"2,000 lbs10"70"34" x 48"48" x 72"11 sec2 HP460/3/601,575 lbsQuote
EHLTD-2-7272"2,000 lbs12"84"34" x 64"48" x 88"11 sec2 HP460/3/601,680 lbsQuote
EHLTD-3-6060"3,000 lbs10"70"34" x 48"48" x 72"11 sec2 HP460/3/601,680 lbsQuote
EHLTD-3-7272"3,000 lbs12"84"34" x 64"48" x 88"13 sec2 HP460/3/601,785 lbsQuote
EHLTD-4-6060"4,000 lbs10"70"34" x 48"48" x 72"16 sec2 HP460/3/601,890 lbsQuote
EHLTD-4-7272"4,000 lbs12"84"34" x 64"48" x 88"16 sec2 HP460/3/601,968 lbsQuote
EHLTD-5-6060"5,000 lbs10"70"34" x 48"48" x 72"16 sec2 HP460/3/601,942 lbsQuote
EHLTD-5-7272"5,000 lbs12"84"34" x 64"48" x 88"23 sec2 HP460/3/602,021 lbsQuote
  • All welded steel construction meets AWS standard
  • Pinch Point Guard standard. Being prepared is the best prevention.
  • 3,000 PSI component rating on swaged hoses and fittings.
  • Industrial quality, 56 frame, 2 HP motor delivers best torque with minimal amperage draw and maximum life.
  • 24 Volt, fused control circuit
  • Comes standard with 24 Volt Hand Control
  • Adjustable upward travel limit switch
  • Rugged deep section double scissor legs for superior strength and height
  • Brass safety velocity fuse in hydraulic actuator prevents sudden drop
  • State of the art bearings for long life - pins and bearings are replaceable
  • Voltage - 208-230/460 Volt, 60 cycle, 3 phase
  • 1,000 - 5,000 Lbs. capacity available.

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Mechanical Options:
  • Removable 42" high handrails including 21" midrail & non-removable toe-board
  • Non-removable 42" high handrails including 21" midrail and toe-board
  • 42" high self locking gate up to 6 feet long
  • Link chain closure gate with snap hook ends for up to 6 foot opening
  • 4-way anti-skid steel treadplate deck
  • Semi-portability option (includes two rigid wheels with a two wheel dolly jack)
  • Full Portability option for 1 to 4,000 lbs. capacity. (includes two rigid and two swivel casters with a non-removable push handle, reinforced frame and foot operated floor locks)
  • NFPA-701 fire retardant accordion skirting - customer installed (includes hardware)
  • NFPA-701 fire retardant accordion skirting - factory installed
  • Steel or Aluminum 12" or 18" length split hinged bridge with run-off guards and lifting chains (72" wide)
  • Carousel (CA-SERIES) mounting to deck (pricing does not include carousel)
  • Powered Carousel electric/hydraulic driven, not variable, hand control (add 2-1/4 LH)
  • Air Caster/Bearings, manual rotation carousel (add 3" to lowered height)
Control Options:
  • Additional 24V weathertight pendant hand control on 8' cord. 2 or 4 push button.
  • 24V NEMA 4 wall mount control station. 2 or 4 push button.
  • 24V NEMA 4 foot control with safety guard on 8' cord. 2-Pedal control for lift-hold-lower circuits or 4-Pedal control for lift-and-tilt circuits.
  • Wireless Remote Control. 2-Pedal control for lift-hold-lower circuits or 4-Pedal control for lift-and-tilt circuits.
Motor/Power Options:
  • 3HP / 1-Phase / 110/208-230V Motor @ 1-1/2 GPM (35 AMP draw at 115V: includes 15 gallon tank)
  • 6.5HP / 3-Phase / 208/230-460V Motor @ 4 GPM ( includes 15 gallon tank)
  • NEMA-4 Upgrade for wash down applications (includes special motor and enclosure)
  • Rotary air/oil power unit (Warrinty void if used without filter-regulator).
  • Reciprocating air/oil power unit, foot treadle control, for 1-3 K capacity
  • Hazardous location power unit & lift-hold-lower control
Miscellaneous Options:
  • Warning Light - operates when up/down button is pressed
  • Warning Beeper - operates when up/down button is pressed
  • High Cycle Bearing Package
  • 2-speed pumps
  • Additional limit switches
  • Approach ramps
  • Paint options
  • Removable toeboards
  • Conveyors
  • Rails or turntables (manual or powered) attached to deck or special deck sizes.
Related Product Lines
ECOA DSL Type:Double High
Capacity:2,000 - 6,000 lbs
Travel:60" - 144"
Down Height:10.25" - 18"
Up Height:70" - 162"
Min Platform:30" x 48"
Max Platform:72" x 132"
ECOA TSL Type:Double High
Capacity:3,000 - 6,000 lbs
Travel:72" - 216"
Down Height:14.25" - 54"
Up Height:86.25" - 270"
Min Platform:30" x 42"
Max Platform:84" x 144"
Southworth LSH5-60
Southworth LSH Type:Double High
Capacity:2,000 - 12,000 lbs
Travel:60" - 144"
Down Height:12.5" - 24"
Up Height:74" - 168"
Min Platform:20" x 53"
Max Platform:42" x 108"
Lift Products LPT-XXH
Lift Products LPT-XXH Type:Double High
Capacity:2,000 - 5,000 lbs
Travel:72" - 96"
Down Height:14.5" - 15"
Up Height:86.5" - 111"
Min Platform:24" x 48"
Max Platform:48" x 88"
Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Products
View all products of this category View Products
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: