Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : multi-stage : triple high : autoquip : torklift t3

TorkLift T3

Autoqip TorkLift T3

American Lifts TorkLift T3 by Autoquip

The TorkLift family is Autoquip's premium series of work station hydraulic lifts. Every Torklift scissors lift comes standard with captured rollers, two piece self-aligning cylinder, and high impact spiral wound bearings.

Three sets of vertically stacked scissors are pinned directly together, stabilized, and raised simultaneously by common hydraulic cylinders. This heavy duty scissor lift table design creates a stable structure that consumes less floor space than single and double pantograph lifts, but travels the same vertical distance.
Ships From:
US Map Oklahoma
Oklahoma
Made By:
Autoquip Logo
Request Quote
TorkLift T3 Specifications
ModelTravelCapacity
(lbs)
HeightPlatform SizeBase
Frame
Edge Loads (lbs)Down
Speed
CylindersMotor
HP
Weight
(lbs)
Quote
Form
MINMAXSTDMAXEndSide
T3-048-04048"4,00016.5"64.5"32" x 33"56" x 57"32" x 33"1,6001,00035 sec31.52,725Quote
T3-048-06048"6,00019"67"34" x 34"58" x 58"34" x 34"2,4001,50035 sec31.52,775Quote
T3-060-02060"2,00015.75"75.75"24" x 38.88"48" x 62.88"24" x 38.88"80050050 sec212,695Quote
T3-060-04060"4,00017.06"77.06"32" x 39"56" x 63"32" x 39"1,6001,00040 sec31.52,875Quote
T3-060-06060"6,00017.06"77.06"32" x 39"56" x 63"32" x 39"2,4001,50045 sec31.52,950Quote
T3-072-02072"2,00015.75"87.75"30" x 44"54" x 68"30" x 44"80050060 sec212,775Quote
T3-072-04072"4,00017.56"89.56"34" x 45"58" x 69"34" x 45"1,6001,00045 sec31.53,050Quote
T3-072-06072"6,00018.44"90.44"32" x 45"56" x 69"32" x 45"2,4001,50050 sec31.53,195Quote
T3-084-02084"2,00017.06"101.06"32" x 51"56" x 75"32" x 51"80050040 sec21.52,950Quote
T3-084-04084"4,00019.56"103.56"40" x 58"64" x 82"40" x 58"1,6001,00055 sec31.53,075Quote
T3-084-06084"6,00022"106"36" x 54"60" x 75"36" x 54"24001,50055 sec31.53,395Quote
T3-096-02096"2,00017.06"113.06"38" x 56"62" x 80"38" x 56"80050040 sec21.53,150Quote
T3-096-04096"4,00020.56"116.56"40" x 58"64" x 82"40" x 58"1,6001,00030 sec353,595Quote
T3-096-06096"6,00021.25"117.25"46" x 59"70" x 83"46" x 59"2,4001,50045 sec453,675Quote
T3-108-020108"2,00018.63"126.63"42" x 63"66" x 87"42" x 63"80050045 sec21.53,150Quote
T3-108-040108"4,00022"130"48" x 64"72" x 88"48" x 64"1,6001,00035 sec353,595Quote
T3-108-060108"6,00023.5"131.5"54" x 65"78" x 89"54" x 65"2,4001,50045 sec453,675Quote
T3-120-020120"2,00018.56"138.56"48" x 69"72" x 93"48" x 69"80050050 sec21.53,475Quote
T3-120-040120"4,00022.56"142.56"48" x 70"72" x 94"48" x 70"1,6001,00040 sec353,875Quote
T3-120-060120"6,00022.56"142.56"56" x 70"80" x 94"56" x 70"2,4001,50055 sec453,975Quote
T3-132-020132"2,00022"154"54" x 75"78" x 99"54" x 75"80050055 sec21.53,825Quote
T3-132-040132"4,00025.06"157.06"56" x 77"80" x 101"56" x 77"1,6001,00060 sec253,050Quote
T3-132-060132"6,00025.06"157.06"56" x 77"80" x 101"56" x 77"2,4001,50040 sec253,175Quote
T3-144-020144"2,00022.56"166.56"56" x 81"80" x 105"56" x 81"80050035 sec253,950Quote
T3-144-040144"4,00022.56"166.56"56" x 81"80" x 105"56" x 81"1,6001,00035 sec354,200Quote
T3-144-060144"6,00025.75"169.75"48" x 82"72" x 106"48" x 82"2,4001,50045 sec254450Quote
  • All scissors rollers are captured within structural steel channels to provide excellent load stability.
  • High impact, spiral wound bearings at every pivot point provide maintenance-free, rugged resistance to abrasion, impact, and uneven loads.
  • Structural cross-members at every pinned joint in the scissors assembly minimizes leg deflection.
  • All hydraulic cylinders contain two-piece, self-aligning piston rods that transmit minimal side forces to the cylinder hinges/pins.
  • Structural steel channels in all top and lower frames provide additional rigidity and resistance to twisting/bending of the lift under load.
  • Solid steel legs and added stiffeners provide overall stability and straight, repeatable roller tracking as the lift raises and lowers.
  • Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
  • Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection and maximizes load stability.
  • Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable scissor lift.
  • On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
  • Semi-transparent poly oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
  • Low pressure hydraulic circuit extends the life of all hydraulic components and puts less stress on the electric motor.
  • Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.
  • Small footprint allows workers to stand closer to the product, minimizing the amount of floor space required for vertical travel.
  • Standard controls are prewired and internal power unit is onboard.
  • Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
  • Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
  • Compliance with recognized standards:
    • ANSI MH29.1 - Safety Requirements for Industrial Scissor Lifts
    • NFPA 70 - National Electric Code
    • ASTM - A36 - Structural Steel Standard
    • ANSI Z535 - Safety Labeling Requirements
    • AWS D.1 - Welding Standards
    • Applicable portions of OSHA 29CFR1910 - General workplace safety

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:
  • Larger Platform Sizes
  • Throw Over Bridge
  • Approach Ramp
  • Accordion Skirts
  • Handrails
  • Special Platform Shapes
  • "V" Deck
  • Conveyor
  • 4 way Non Skid Tread Plate
  • Bevel Toe Guard
  • Electric Toe Guards
  • Photoeye Toe Indicator
  • Stainless Steel Platform
  • Stainless Steel Skin
  • Lifting Eyes
Electrical Options:
  • Guarded Up/Down Foot Switch
  • Upper/Lower Travel Limit Switch
  • Key Lockout Switch
  • 115 Volt Controls
  • NEMA-12 Enclosure
  • 115 Volt AC Down Solenoid Coil
  • 24 Volt DC Down Solenoid Coil
  • Magnetic Push Button Station
  • Up/Down Push Button Station
  • Hook for Pushbutton
  • Weatherproof Push Button
  • Audible Signal w/Volume Adjust
  • Flashing Red Light
  • No Controls
Power Unit Options:
  • Remote Power Units
  • Wall Mounting Brackets
  • Cover for Remote Power Unit
  • Int. 3/4 HP Single Phase Power Unit
  • Hydraulic Hose Quick Disconnect
  • Remote Air Operated Power Unit
  • Hand Operated Up/Down Control
  • Foot Operated Up/Down Air Valve
  • Water Glycol
  • Food Grade Oil
  • Biodegradable Oil
  • Dipstick
  • Manual Valve Off Pressure Line
  • Oil Immersion Heater
  • Sight Gauge
  • Connection Hose
  • 3HP 3 Phase Pump Unit
  • Air Powered Hydraulic Pump
  • Continuous Running Pump Unit
  • External Pump Unit
  • Washdown (NEMA 4) Pump Unit
  • No Power Unit & No Controls
High Cycle Package:
  • Heavy duty cylinders
  • Hardened wear strips
  • Needle bearing rollers
Baseframe Accessories:
  • Anchor Clips
  • Built Up Baseframe
  • Fork Truck Pockets
Gates & Enclosures
  • Single Swing Gates
  • Biparting Swing Gates
  • Single Panel Vertical Acting Gates
  • Bi Panel Vertical Acting Gates
  • Horizontal Sliding Gates
  • Panels (standard 96" high)
  • Interlocks
Paint Options:
  • Black, Brown, Machinery Grey, Blue
  • Match Color
  • Safety Colors: Orange or Yellow
  • Epoxy Paint
  • Steel-it
  • Primer Only
  • Tile Clad Epoxy
Related Product Lines
Autoquip S35TH
Autoquip S35TH Type:Triple High
Capacity:1,500 - 6,600 lbs
Travel:72" - 174"
Down Height:19.5" - 37.5"
Up Height:91.5" - 211.5"
Min Platform:24" x 36"
Max Platform:48" x 100"
ECOA TSL
ECOA TSL Type:Triple High
Capacity:3,000 - 6,000 lbs
Travel:72" - 216"
Down Height:14.25" - 54"
Up Height:86.25" - 270"
Min Platform:30" x 42"
Max Platform:84" x 144"
ECOA QSL
ECOA QSL Type:Quad High
Capacity:3,000 - 6,000 lbs
Travel:240" - 288"
Down Height:54" - 68"
Up Height:294" - 356"
Min Platform:60" x 96"
Max Platform:84" x 144"
Autoquip TorkLift T2
Autoquip TorkLift T2 Type:Double High
Capacity:2,000 - 10,000 lbs
Travel:36" - 144"
Down Height:10.5" - 21"
Up Height:46.5" - 165"
Min Platform:26" x 32"
Max Platform:84" x 141"
Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Products
View all products of this category View Products
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: