Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : mechanical : stationary : autoquip : vertical ball screw : 36-vb-040

Autoquip 36-VB-040

Autoqip Vertical Ball Screw Lift

Autoquip 36-VB-040 Vertical Ball Screw Lift Table

VBS Vertical Ball Screw scissors lifts offer dependable mechanical lifting solutions by supporting the scissors table and load from beneath and raising with a vertical ball screw actuator. Mechanical ball screws provide a high degree of precision and repeatability, and can be used in single or multiple screws to vary load capacity.

The ball screw actuator is mounted at the clevis end of the scissors lift, driven by a gear motor with instantaneous brake, and stabilized by the scissors leg assembly. The actuator can be mounted below grade to provide 4-sided deck access, or above grade if 3-sided deck access is acceptable. Vertical Ball Screw scissors lifts provide the most cost-effective and low-profile of all the mechanical scissors lift solutions. As with other mechanical lifts, predetermined work elevations can be programmed with the use of a transducer or encoder and a PLC motor controller.
Ships From:
US Map Oklahoma
Oklahoma
Made By:
Autoquip Logo
Request Quote
Specifications

ModelTravelCapacityHeightPlatform SizeBase
Frame
Edge LoadsSpeedMotorWeight
MINMAXSTDMAXEndSideUpDown
36-VB-04036"4000 lbs5"41"12" x 48"36" x 72"12" x 48"2000 lbs2000 lbs23 sec23 sec2 HP705 lbs
Features

  • Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
  • Solid steel leg and added stiffeners provide optimal overall stability and straight, repeatable tracking of the rollers as the lift raises and lowers.
  • Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and extends the life of the platform deck.
  • Vertical ball screws are very rigid and provide stable load support throughout the lift's travel.
  • Maintenance-free bearings at pivot points require no lubrication.
  • Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
  • Vertical ball screw actuator design is simple and easy to inspect and maintain.
  • Vertical ball screw actuator is the least noisy of all mechanical actuators - providing a more tolerable and productive work environment.
  • On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
  • 1 to 1 ratio of actuator stroke to lift travel provides a more repeatable and accurate programmed elevation stop.
  • Programmabl mechanical drive allows the lift to be called/sent to multiple pre-determined levels.
  • Stopped elevations are maintained indefinitely - a critical asset for alignment and precision applications.
  • Drive motors are rated for variable frequency drive control signals.
  • Travel limit switches are mounted in the lift base frame to prevent the mechanical actuator from overextending the stroke.
  • Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable lift.
  • Compliance with recognized standards:
    • ANSI MH29.1 - Safety Requirements for Industrial Scissors Lifts
    • NFPA 70 - National Electric Code
    • ASTM - A36 - Structural Steel Standard
    • ANSI Z535 - Safety Labeling Requirements
    • AWS D.1 - Welding Standards
    • Applicable portions of OSHA 29CFR1910 - General workplace safety
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:
  • Larger Platform Sizes
  • Accordion Skirts
  • Conveyor
  • 4 way Non Skid Tread Plate
  • Bevel Toe Guard
  • Electric Toe Guards
  • Photoeye Toe Indicator
  • Lifting Eyes
Baseframe Accessories:
  • Anchor Clips
Gates & Enclosures
  • Single Swing Gates
  • Biparting Swing Gates
  • Single Panel Vertical Acting Gates
  • Bi Panel Vertical Acting Gates
  • Horizontal Sliding Gates
  • Panels (standard 96" high)
  • Interlocks
Paint Options:
  • Black, Brown, Machinery Grey, Blue
  • Match Color
  • Safety Colors: Orange or Yellow
  • Epoxy Paint
  • Steel-it
  • Primer Only
  • Tile Clad Epoxy
Electrical Options:
  • Guarded Up/Down Foot Switch
  • Upper/Lower Travel Limit Switch
  • Key Lockout Switch
  • 115 Volt Controls
  • Magnetic Push Button Station
  • Up/Down Push Button Station
  • Hook for Pushbutton
  • Weatherproof Push Button
  • Audible Signal w/Volume Adjust
  • Flashing Red Light
Literature

Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: