Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : hydraulic : heavy duty : ecoa : hltx : hlt2-045-24

ECOA HLT2-045-24

ECOA HLT Lift Table

ECOA HLT2-045-24 Hydraulic Lift Table

ECOA's HLT2-045-24 is a high-speed electrohydraulic scissor lift. The scissor leg rollers, both top and bottom, are entrapped within the structure of the platform and base frame to ensure maximum unit stability on all four sides.

All ECOA Lift Tables are designed and constructed for heavy-duty applications under the toughest working conditions, offering years of trouble-free operation.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
Specifications

ModelTravelCapacityHeightPlatform SizeBase
Frame
Edge LoadsUp
Speed
MotorCylinderShip
Weight
MINMAXSTDMAXStaticRolling
HLT2-045-2424"4,500 lbs7.125"31"24" x 36"48" x 60"23.5" x 35"4,000 lbs2,680 lbs12 sec1.5 HP2695 lbs
Features

ECOA HLT Maintenance Bars ECOA HLT Rollers ECOA HLT Power Unit ECOA HLT Scissor Legs
Hinged safety maintenance bars Entrapped rollers Optional PLC operated power unit Contoured Scissor Legs
  • Single-acting cylinders with positive internal stops are fastened at the rod end sleeve with removable axles for enhanced maintainability
  • Heavy-duty welded construction designed with a 3-to-1 safety factor, complies with ANSI MH29.1-1994
  • PTFE (Teflon) lined, composite bearings at all wear points. Hardened chrome plated axles used at all bearing surfaces
  • Scissor Legs bolted to base frame and platform at fixed (clevis) end, for enhanced maintainability and ease of disassembly, if required
  • 1.5HP, 230V-460V/3PH or 230V/1PH integral power unit. Optional 1.5HP, 115V/1PH power unit available
  • Optional Programmable Logic Controller (PLC) operates integral power unit and enables a wide array of plug & play options
  • Smooth steel tops
  • Includes hydraulic oil
  • HLTx Lifts have the scissor leg roller entrapped within the base frame and platform for superior stability
  • Hinged safety maintenance bars
  • Surfaces degreased, oxide primed and finished with two coats of durable enamel
  • Safety striping and warning decals meet or exceed OSHA requirements
  • Contoured Scissor Legs
  • 24V operating control voltage
  • NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" pushbutton control station with 8 ft. straight cord
  • 10 ft. power cord (connector not included)
  • Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
  • Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
  • Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
  • Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
  • Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • Remote Power Units with 5'0" hydraulic hose
  • Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
  • Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options:
  • Steel Approach Ramp
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Skirting
  • Accordion Bellows Skirts
  • Outboard Mounting of Casters w/Standard Lowered Height
  • Straight Toeguards for surface mounting
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • USDA accepted epoxy coatings for Lift Platform
  • Stainless Steel Platform Overlay
  • Ball Transfer Top
  • Conveyor Tops
  • (2) Retractable Wheels and (2) Wheel Dolly Jack to 6,500 lbs. Steel Wheels
  • (2) Fixed Wheels and (2) Wheel DollyJack to 12,000 lbs. Steel Wheels
  • (4) "V" Groove, or Single Flanged Steel Wheels or (2) combined with (2) Flat Steel Wheels, Mounted off sides or ends
  • (2) Fixed and (2) Swivel Wheels
  • Integrally Mounted Floor Lock
Literature

Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: