Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : hydraulic : heavy duty : ecoa : hltxhc : hlt3hc-040-36

ECOA HLT3HC-040-36

ECOA HLTxHC Lift Table

ECOA HLT3HC-040-36 High Cycle Lift Table

ECOA's HLT3HC-040-36 is a high-cycle, electrohydraulic scissor lift, designed for applications where overall cycles exceed 40,000 per year, up to a maximum of 100,000 cycles per year.

The HLT3HC-040-36 lift is designed for moderate load, moderately high-speed applications, where continued preventive maintenance is possible.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
Specifications

ModelTravelCapacityHeightPlatform SizeBase
Frame
Edge LoadsUp
Speed
MotorShip
Weight
MINMAXSTDMAXStaticRolling
HLT3HC-040-3636"4,000 lbs7.25"43"36.25" x 48"48" x 72"35.625" x 47.25"3,500 lbs2,345 lbs18 sec3 HP1,185 lbs
Features

  • HLTxHC lifts have sealed camfollower rollers entrapped within base frame and platform for superior stability, enhanced durability, and trouble free operation. Rollers run on hardened tracks
  • Double acting cylinders with positive internal stops are pinned at the rod end sleeve with removable pins, and at the thrust angle with removable gibs, for enhanced maintainability
  • Heavy duty welded construction designed with a 3-to-1 safety factor, complies with ANSI MH29.1 - 1994
  • PTFE (Teflon) lined composite bearings at all wear points. Hardened chrome plated pins used at all bearing surfaces. Center axle pivot bearings are retained within removable hubs, for ease of maintenance and inspection. All pivot bearings are replaceable, if necessary
  • Scissor legs bolted to base frame and platform at fixed (clevis) end, for enhanced maintainability and ease of disassembly, if required
  • 3 HP 230V-460V/3 PH or 230V/1 PH continuous-running remote power unit with large integral reservoir, powers lift up and down for increased speeds. Optional 1.5 HP power unit available
  • Optional Programmable Logic Controller (PLC) operates integral power unit - enables large array of different options
  • Hinged safety maintenance bars
  • Surfaces degreased, oxide primed, finished with durable enamel
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
  • Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
  • Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
  • Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • Remote Power Units with 5'0" hydraulic hose
  • Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
  • Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options
  • Steel Approach Ramp
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Skirting
  • Accordion Bellows Skirts
  • Outboard Mounting of Casters w/Standard Lowered Height
  • Straight Toeguards for surface mounting
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • USDA accepted epoxy coatings for Lift Platform
  • Stainless Steel Platform Overlay
  • Ball Transfer Top
  • Conveyor Tops
  • (2) Retractable Wheels and (2) Wheel Dolly Jack to 6,500 lbs. Steel Wheels
  • (2) Fixed Wheels and (2) Wheel DollyJack to 12,000 lbs. Steel Wheels
  • (4) "V" Groove, or Single Flanged Steel Wheels or (2) combined with (2) Flat Steel Wheels, Mounted off sides or ends
  • (2) Fixed and (2) Swivel Wheels
  • Integrally Mounted Floor Lock
Literature

Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: