Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : tandem : double wide : ecoa : mltdw : mltdw-25-48

ECOA MLTDW-25-48

ECOA MLTDW

ECOA MLTDW-25-48 Double Wide Heavy Duty Lift Table

ECOA MLTDW Series Lift Tables are double wide, high-capacity heavy-duty electrohydraulic scissor lifts with capacities of 25,000 to 60,000 lbs., travel distances of 30" to 72" with platform sizes of 96" x 60" to 120" x 132".

MLTs are designed for extremely heavy-duty lifting. From their structural strength to their high-power lifting ability, the MLT Series brings new meaning to the term "heavy duty". All have a design safety factor of 3 to 1.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
Specifications

ModelTravelCapacityHeightPlatform SizeBase
Frame
Edge Loads
Max**
Up
Speed
CylindersMotorShip*
Weight
MINMAXSTDMAX
MLTDW-25-4848"25,000 lbs16"64"96" x 72"120" x 96"96" x 72"20,000 lbs30 sec25 HP7,300 lbs

*Note: Standard platforms only.

**Note: Load that can be rolled over the side or end in any raised position. (Standard platform only.)

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection. Note: Where available power supply is 208V/3PH booster transformers are required for 240V/3PH at motor, see options. Conforms to or exceeds ANSI standard MH29.1-1994.

Features

  • Externally-mounted power unit with 5 through 7.5HP, 230/460V, 3PH, 60Hz, continuous duty TEFC motor. (Specify required voltage)
  • High-pressure gear pump
  • NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" pushbutton control station with 20 ft. coil cord and hanger bracket
  • NEMA-12 prewired control box (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
  • All controller components are UL and/or CSA approved
  • 24V operating control voltage
  • NEMA 4, 13 (water-tight, dusttight and oil-tight) adjustable upper travel limit switch to automatically shut off motor and pump at pre-set height, plus 4 secondary mechanical upper travel back-up stops
  • Smooth steel platform
  • 8 in. high straight toeguards with yellow and black safety stripes
  • Rectangular structural tube scissor legs and torque tubes for maximum horizontal and longitudinal stability and minimal deflection
  • Positive stops on all four corners for maximum roll over capacity in lowered position
  • Dual safety restraint maintenance bar
  • Cylinder rod end protectors
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • Sealed, ram-type, full oil displacement hydraulic cylinders with hard, chrome-plated and polished stress-proof steel rams and polyurethane seals. No breather ports
  • Flow Limiter Valve at base of each cylinder
  • Axles and shafts are stressproof shafting, hard chrome plated and polished, retained with a positive locking screw ring system and equipped with lifetime lubricated PTFE lined, composite bearings
  • Aluminum valve block manifold in the external power unit contains check valve, relief valve, pressure-compensated flow control valve and down solenoid valve cartridges. The solenoid valve includes a filter screen
  • Hydraulic hose, SAE 100 R2AT double wire braid from cylinders to universal connection in the base frame
  • Pressure line 25 micron cartridge filter
  • 11 gal. reservoir, hydraulic oil not included
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options:
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Safety Skirting
  • Accordion Bellows Skirts
  • Portability
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • Conveyor Tops
Literature

Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: