Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : tandem : quad : ecoa : mltqd : mltqd-50-48

ECOA MLTQD-50-48

ECOA MLTQD

ECOA Magnum MLTQD-50-48 Quad Lift

ECOA MLTQD Series Lift Tables take heavy-duty lifting to another level of capability. These extra-heavy-duty electrohydraulic scissor lifts have capacities of 50,000 to 120,000 lbs., travel distances of 30 to 72 in. with platform sizes of 96 x 120 to 120 x 264 in.

MLTs are designed for extremely heavy-duty lifting. From their structural strength to their high-power lifting ability, the MLT Series brings new meaning to the term "heavy duty". All have a design safety factor of 3 to 1.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
Specifications

ModelTravelCapacityHeightPlatform SizeBase
Frame
Axel Load Max
Concentrated*
Up
Speed
CylindersMotorShip**
Weight
MINMAXSTDMAX
MLTQD-50-4848"50,000 lbs16"64"96" x 144"120" x 192"96" x 144"40,000 lbs45 sec410 HP14,600 lbs

*Note: Load that can be rolled over the side or end in any raised position. (Standard platform only.) **Note: Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection. Note: Where available power supply is 208V/3PH booster transformers are required for 240V/3PH at motor, see options. Conforms to or exceeds ANSI standard MH29.1-1994.

Features

  • Externally-mounted power unit with 10 through 15HP, 230/460V, 3PH, 60Hz, continuous duty TEFC motor. Specify required voltage
  • High-pressure gear pump
  • NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" push button control station with 20 ft. coil cord and hanger bracket
  • NEMA-12 prewired control box (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
  • All controller components are UL and/or CSA approved
  • 24V operating control voltage
  • NEMA 4, 13 (water-tight, dusttight and oil-tight) adjustable upper travel limit switch to automatically shut off motor and pump at pre-set height, plus 4 secondary mechanical upper travel back-up stops
  • 8 in. straight toeguards with yellow and black safety stripes
  • Dual safety restraint maintenance bars
  • Pressure line 25 micron cartridge filter
  • Rectangular structural tube scissor legs and torque tubes for maximum horizontal and longitudinal stability and minimal deflection
  • Positive stops on all four corners for maximum roll over capacity in lowered position
  • Smooth steel platform
  • Cylinder rod end protectors
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • Sealed, ram-type, full oil displacement hydraulic cylinders with hard, chrome-plated and polished stress-proof steel rams and polyurethane seals. No breather ports
  • Flow Limiter Valve at base of each cylinder
  • Axles and shafts are stressproof shafting, hard chrome plated and polished, retained with a positive locking screw ring system and equipped with lifetime lubricated PTFE type lined, composite bearings
  • Aluminum valve block manifold in the external power unit contains check valve, relief valve, pressurecompensated flow control valve and down solenoid valve cartridges. The solenoid valve includes a filter screen
  • Hydraulic hose, SAE 100 R2AT double wire braid from cylinders to universal connection in the base frame
  • 22 gal. reservoir, hydraulic oil not included
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options:
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Safety Skirting
  • Accordion Bellows Skirts
  • Portability
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • Conveyor Tops
Literature

Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: