Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : dock : portable : ecoa : trans-a-dok tad-s2 : tad-s2-50-708

ECOA TAD-S2-50-708

ECOA Trans-A-Dok TAD-S2

ECOA Trans-A-Dok TAD-S2-50-708 Loading Dock Lift

ECOA TAD-S2 Trans-A-Dok Series loading docks are high speed, high axle load, self contained mobile or stationary lifts that require no pit or concrete work. As mobile units, they can be easily moved to service several locations. Load capacities are 5,000 to 8,000 lbs., travel distances are 54 in. with platform sizes from 72 x 72 to 84 x 120 in.

A detachable dolly and wheels make the TAD-S2 easily portable. If the installation is to be permanent, the unit can be lag bolted to the surface of existing concrete.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
Specifications

ModelTravelCapacityHeightPlatform
Size
Axle Load Capacity OverWidthSpeed (F.P.M.)Motor
Std. HP
Ship
Weight
MINMAXBridge EndsEnd Opp BridgeSidesEmptyLoadedDown
TAD-S2-50-70854"5,000 lbs6"60"84" x 96"3,500 lbs2,800 lbs2,800 lbs93"1410153 HP2,550 lbs

Standard power supply is 230V/3PH/60Hz. See Options for alternate power supply. Ship weight is approximate and includes platform and power unit. Power requirements depend upon frequency and type of operation and require specific selection. If required voltage is 208V/3PH/60Hz, booster transformers must be furnished. See options.

Features

  • Alternate transfer arrangements easily accomplished
  • Internally-mounted 1.5HP, 115/230V, 1PH, 60Hz TENV intermittent duty super torque motor. Specify required voltage
  • 24V operating control voltage
  • NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" pushbutton control with 10 ft. coiled cord
  • NEMA-12 prewired control box (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
  • All controller components are UL and/or CSA approved
  • Upper travel limit switch to automatically shut off motor and pump at pre-set height
  • 15 ft. power cord with connector plug
  • Four-way safety treadplate deck, straight toeguards with black and yellow safety stripes
  • Steel approach ramp, 30 x 60 in., hinged, with 2 lifting chains
  • Steel bridge plate, 18 x 60 in., hinged with 2 lifting chains
  • Four safety chains with snap hooks
  • Removable steel handrail 42 in. high with midrail and 4 in. high toeboard
  • Rectangular, structural tube scissor legs
  • Hinged safety restraint maintenance bars
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • Detachable dolly jack and flipup/flip-down wheels for portability
  • Hard, chrome-plated, polished shafting, hydraulic rams and axles at pivot points
  • Hydraulic velocity fuse at base of each cylinder
  • Lifetime, self-lubricating, antifriction bearings at all pivot points
  • Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
  • Includes hydraulic oil
TAD Transfer Arrangement 1

TAD Transfer Arrangement 2TAD Transfer Arrangement 3
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

  • Two second warning bell with adjustable voulme control
  • Flashing red light
  • 3 HP 230 Volt 1 Phase 60 Hz Power Unit
  • Remote Power Unit with 15'0" Hydraulic Hose & Limit Switch Wire
  • Pop-Up Wheel Chock on Ramp End of Platform
  • Oil reservoir immersion heater with thermostat control
  • Tow-Eye System; Dolly Jack has additional Tow-Eye to be attached to fork truck for towing
  • Aluminun bridge plate 18" x 60"
  • Aluminum approach ramp 36" x 60"
  • Steel bridge plate 18" x 60"
  • Upper Travel Limit Switch
  • Transformer for Boosting Power from 208V/3PH/60Hz to 240V/3PH/60Hz (2 required)
Literature

Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: