Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : multi-stage : triple high : ecoa : tsl : tsl-30-096

ECOA TSL-30-096

ECOA TSL

ECOA TSL-30-096 Triple Scissors Hydraulic Lift Table

ECOA TSL Series Lift Tables are high travel triple electro-hydraulic scissor lifts with capacities of 3,000 to 6,000 lbs., travel distances of 72 to 216 in. with platform sizes of 30 x 42 to 84 x 144 in.

All ECOA Lift Tables are designed and constructed for heavyduty applications under the toughest working conditions, offering years of trouble-free operation.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
Specifications

ModelTravelCapacityHeightPlatform SizeBase
Frame
Edge Loads*Lift
Speed
CylindersMotorShip
Weight*
MINMAXSTDMAXStaticRolling
TSL-30-09696"3,000 lbs14.25"110.25"30" x 48"48" x 72"30" x 48"1,500 lbs1,000 lbs30 sec11.5 HP2,400 lbs

*Note: Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection. 1.5HP Power Units are internal as standard equipment. 3HP and 4.8HP Power Units are remote as standard equipment. Standard power supply for 1.5HP Power Unit is 230V/1PH/60Hz. Optional power supply for 1.5HP Power Unit is 208/230/460/3PH/60Hz. 115V/1PH/60Hz. Power Supply requires a 20 amp circuit. Standard power supply required for 3 and 4.8HP is 230/460/3PH/60Hz. Optional power supply for 3 and 4.8HP Power Units is 230/1PH/60 Hz (increases upspeed by 33%).

Note: Where available power supply is 208V/3PH, booster transformers are required for 240V/3PH for 3HP and 4.8HP motors, see options. Conforms to or exceeds ANSI standard MH29.1-1994.

Features

  • Smooth steel tops
  • On 4.8HP units, manifold with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters. On 1.5HP or 3HP power units, valves are internally mounted on gear pump
  • NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" push button control station with 20 ft. coil cord
  • NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
  • Internally-mounted 1.5HP, 230V, 1PH, 60Hz TENV intermittent duty super torque motor or externally-mounted 3 or 4.8HP, 230/460V, 3PH, 60Hz continuous duty motor
  • Hydraulic flow limiter valve at the base of each cylinder
  • High-pressure gear pump
  • Optional upper travel limit switch
  • Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
  • Lifetime self-lubricating, PTFE lined, composite bearings at all pivot points
  • 10 ft. power cord, connector not included (For internal power unit only)
  • Safety restraint maintenance bars
  • All controller components are UL and/or CSA approved
  • Straight toeguards with yellow and black safety stripes
  • 24V operating control voltage
  • Mechanical upper travel stops
Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
  • Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
  • Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
  • Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • Remote Power Units with 5'0" hydraulic hose
  • Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
  • Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options:
  • Steel Approach Ramp
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Skirting
  • Accordion Bellows Skirts
  • Straight Toeguards for surface mounting
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • USDA accepted epoxy coatings for Lift Platform
  • Stainless Steel Platform Overlay
  • Ball Transfer Top
  • Conveyor Tops
  • Integrally Mounted Floor Lock
Literature

Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Models
View all models of this product series View Models
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: