Autoquip 60-SL-080

Autoquip 60-SL-080 Spiralift Mechanical Lift Table

A unique mechanical lifting solution, Spiral Scissor Mechanical lifts support loads from beneath and raise to any elevation using a stacked spiral column of interlocked horizontal rings and vertical bands. This proprietary "spiral" design provides a high degree of precision and repeatability, and can be used in single or multiple columns to vary load capacity.

The Spiralift mechanism is located inside the base at the clevis end of the scissors lift, driven by a gear motor with instantaneous brake, and stabilized by the scissors leg assembly. As with other mechanical lifts, predetermined work elevations can be programmed with the use of a transducer or encoder and a PLC motor controller.

Ships From:
US Map Oklahoma

Oklahoma

Made By:

Request Quote

Specifications

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge Loads		Speed		Motor	Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	End	Side	Up	Down	Motor	Weight
60-SL-080	60"	8,000 lbs	15"	75"	32" x 95"	56" x 119"	32" x 95"	4,000 lbs	4,000 lbs	48 sec	48 sec	5 HP	975 lbs

Features

Joints feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
Solid steel leg and added stiffeners provide optimal overall stability and straight, repeatable tracking of the rollers as the lift raises and lowers.
Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and extends the life of the platform deck.
Extremely rigid Spiralift stacking column mechanism provides stable load support throughout the lift's travel.
Maintenance-free bearings at pivot points require no lubrication.
Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection.
1 to 1 ratio of actuator stroke to lift travel provides a more repeatable and accurate programmed elevation stop.
Programmabl mechanical drive allows the lift to be called/sent to multiple pre-determined levels.
Stopped elevations are maintained indefinitely - a critical asset for alignment and precision applications.
Drive motors are rated for variable frequency drive control signals.
Travel limit switches are mounted in the lift base frame to prevent the mechanical actuator from overextending the stroke.
Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable lift.
Compliance with recognized standards:
- ANSI MH29.1 - Safety Requirements for Industrial Scissors Lifts
- NFPA 70 - National Electric Code
- ASTM - A36 - Structural Steel Standard
- ANSI Z535 - Safety Labeling Requirements
- AWS D.1 - Welding Standards
- Applicable portions of OSHA 29CFR1910 - General workplace safety

Options

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Platform Options:

Larger Platform Sizes
Accordion Skirts
Handrails
"V" Deck
Conveyor
4 way Non Skid Tread Plate
Bevel Toe Guard
Electric Toe Guards
Photoeye Toe Indicator
Stainless Steel Platform
Stainless Steel Skin
Lifting Eyes

Baseframe Accessories:

Anchor Clips

Gates & Enclosures

Single Swing Gates
Biparting Swing Gates
Single Panel Vertical Acting Gates
Bi Panel Vertical Acting Gates
Horizontal Sliding Gates
Panels (standard 96" high)
Interlocks

Paint Options:

Black, Brown, Machinery Grey, Blue
Match Color
Safety Colors: Orange or Yellow
Epoxy Paint
Steel-it
Primer Only
Tile Clad Epoxy

Electrical Options:

Guarded Up/Down Foot Switch
Upper/Lower Travel Limit Switch
Key Lockout Switch
Magnetic Push Button Station
Up/Down Push Button Station
Hook for Pushbutton
Weatherproof Push Button
Audible Signal w/Volume Adjust
Flashing Red Light

Literature

Autoquip Spiralift Product Literature (PDF 150KB)
Autoquip Spiralift Owner's Manual (PDF 855KB)
Autoquip Spiralift Drawing (PDF 192KB)

Quick Quote

Call 877-860-3620 & tell us your requirements or Request Quote

View All Models

View all models of this product series View Models

Search By Specification

Search over 2,000 lift tables by 9 different specs Search Now

Solution Dynamics, Inc. BBB Business Review

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: