ECOA CDL Compact Double Scissors Lift Tables

Model	Travel	Capacity	Height		Platform Size		Base Frame	Edge Loads* Static	Up Speed	Cylinders	Motor	Ship* Weight	Quote Form
Model	Travel	Capacity	MIN	MAX	STD	MAX	Base Frame	Edge Loads* Static	Up Speed	Cylinders	Motor	Ship* Weight	Quote Form
CDL-05-36	36"	500 lbs	7"	43"	18" x 36"	30" x 60"	18" x 36"	250 lbs	13 sec	1	.75 HP	250 lbs	Quote
CDL-10-36	36"	1,000 lbs	7"	43"	18" x 36"	30" x 60"	18" x 36"	500 lbs	26 sec	2	.75 HP	295 lbs	Quote
CDL-15-36	36"	1,500 lbs	7"	43"	18" x 36"	30" x 60"	18" x 36"	750 lbs	26 sec	2	.75 HP	320 lbs	Quote
CDL-20-36	36"	2,000 lbs	7"	43"	18" x 36"	30" x 60"	18" x 36"	1,000 lbs	19 sec	3	.75 HP	340 lbs	Quote

*Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection.

Internally-mounted .75HP, 115V,1PH, 60Hz intermittent duty TENV super torque motor
115V operating control voltage
NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" pushbutton box with 8 ft. straight cord
10 ft. power cord (connector plug not included)
Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
Surfaces degreased, oxide primed and finished with two coats of enamel

Lifetime self-lubricating, anti-friction bearings at all pivot points
Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
Smooth steel tops and straight safety toeguards
Includes hydraulic oil

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:

Up-Down Push Button Station
Push Button mounted on platform with Disconnect Plug
Key Operated Up-Down Selector
Up-Down Push Button with Key Lockout
Foot Operated Control
Limit Switch
Booster Transformers (2 required for 3PH Power Supply)
Flashing Red Light
Two Second Up-down Warning Bell with Volume Control
Electric Toeguards, Tapeswitch
Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)

Hydraulic Options:

Manual Down Valve
Adjustable Flow Control Down Valve
Larger Power Unit for faster lift speeds
Remote Power Units with 5'0" hydraulic hose
Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
Explosion Proof Power Unit-External
Quick Disconnect Couplings

Mechanical Options:

Steel Approach Ramp
Steel 42" high Handrail with Midrail/Toeboard
Roll-Up Skirting
Accordion Bellows Skirts
Straight Toeguards for surface mounting
Beveled Toeguards for pit mounting
Safety Treadplate
USDA accepted epoxy coatings for Lift Platform
Stainless Steel Platform Overlay
Ball Transfer Top
Conveyor Tops
Integrally Mounted Floor Lock

ECOA CDL Product Literature (PDF 360KB)

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext:

ECOA CDL

CDL Series Compact Double Scissors Lift Tables