Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : compact : heavy duty : ecoa : clt

ECOA CLT

ECOA CLT

CLT Series Compact Heavy Duty Lift Tables

ECOA CLT-series Lift Tables are heavy-duty electro-hydraulic scissor lifts with small platforms and high travel for an infinite number of applications. Load capacities are 2,000 to 6,000 lbs., travel distances of 36" to 48" with platform sizes of 24" x 36" to 48" x 84".
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
ModelTravelCapacityHeightPlatform SizeBase
Frame
Edge Loads*Up
Speed
CylindersMotorShip*
Weight
Quote
Form
MINMAXSTDMAXStaticRolling
CLT-02-36-S36"2,000 lbs8.5"44.5"24" x 36"48" x 72"22.5" x 35"1,000 lbs670 lbs15 sec1.75 HP Ext600 lbsQuote
CLT-02-36-L36"2,000 lbs8.5"44.5"24" x 48"48" x 72"22.5" x 47"1,000 lbs670 lbs15 sec1.75 HP Int650 lbsQuote
CLT-03-36-S36"3,000 lbs8.5"44.5"24" x 36"48" x 72"22.5" x 35"1,500 lbs1,005 lbs30 sec2.75 HP Ext650 lbsQuote
CLT-03-36-L36"3,000 lbs8.5"44.5"24" x 48"48" x 72"22.5" x 47"1,500 lbs1,005 lbs30 sec2.75 HP Int700 lbsQuote
CLT-04-36-S36"4,000 lbs8.5"44.5"24" x 36"48" x 72"22.5" x 35"2,000 lbs1,340 lbs30 sec2.75 HP Ext700 lbsQuote
CLT-04-36-L36"4,000 lbs8.5"44.5"24" x 48"48" x 72"22.5" x 47"2,000 lbs1,340 lbs30 sec2.75 HP Int725 lbsQuote
CLT-05-36-S36"5,000 lbs8.5"44.5"24" x 36"48" x 72"22.5" x 35"2,500 lbs1,675 lbs40 sec2.75 HP Ext750 lbsQuote
CLT-05-36-L36"5,000 lbs8.5"44.5"24" x 48"48" x 72"22.5" x 47"2,500 lbs1,675 lbs40 sec2.75 HP Int800 lbsQuote
CLT-06-36-S36"6,000 lbs8.5"44.5"24" x 36"48" x 72"22.5" x 35"3,000 lbs2,010 lbs40 sec2.75 HP Ext775 lbsQuote
CLT-06-36-L36"6,000 lbs8.5"44.5"24" x 48"48" x 72"22.5" x 47"3,000 lbs2,010 lbs40 sec2.75 HP Int825 lbsQuote
CLT-02-48-S48"2,000 lbs8.5"56.5"24" x 48"48" x 84"22.5" x 44"1,000 lbs670 lbs15 sec1.75 HP Ext650 lbsQuote
CLT-02-48-L48"2,000 lbs8.5"56.5"24" x 60"48" x 84"22.5" x 56"1,000 lbs670 lbs20 sec1.75 HP Int700 lbsQuote
CLT-03-48-S48"3,000 lbs8.5"56.5"24" x 48"48" x 84"22.5" x 44"1,500 lbs1,005 lbs30 sec2.75 HP Ext700 lbsQuote
CLT-03-48-L48"3,000 lbs8.5"56.5"24" x 60"48" x 84"22.5" x 56"1,500 lbs1,005 lbs35 sec2.75 HP Int750 lbsQuote
CLT-04-48-S48"4,000 lbs8.5"56.5"24" x 48"48" x 84"22.5" x 44"2,000 lbs1,340 lbs30 sec2.75 HP Ext725 lbsQuote
CLT-04-48-L48"4,000 lbs8.5"56.5"24" x 60"48" x 84"22.5" x 56"2,000 lbs1,340 lbs35 sec2.75 HP Int775 lbsQuote
CLT-05-48-S48"5,000 lbs8.5"56.5"24" x 48"48" x 84"22.5" x 44"2,500 lbs1,675 lbs40 sec2.75 HP Ext800 lbsQuote
CLT-05-48-L48"5,000 lbs8.5"56.5"24" x 60"48" x 84"22.5" x 56"2,500 lbs1,675 lbs80 sec2.75 HP Int850 lbsQuote
CLT-06-48-S48"6,000 lbs8.5"56.5"24" x 48"48" x 84"22.5" x 44"3,000 lbs2,010 lbs40 sec2.75 HP Ext825 lbsQuote
CLT-06-48-L48"6,000 lbs8.5"56.5"24" x 60"48" x 84"22.5" x 56"3,000 lbs2,010 lbs80 sec2.75 HP Int875 lbsQuote

*Standard platforms only.

Oversized platforms, beveled toeguards, roller shades, accordion skirting and electrical tape switches will affect overall size. Power requirements depend upon frequency and type of operation and require specific selection.

  • Base and platform rollers are retained inside the channel frames
  • Internally or externally mounted .75HP, 115/230 V, 1PH, 60Hz or 208/230/460V, 3PH, 60Hz intermittent duty TENV super torque motor. Specify required voltage
  • 24V operating control voltage
  • NEMA-4X constant-pressure (water-tight, oil-tight and corrosionresistant) "UP-DOWN" pushbutton control station with 8 ft. straight cord
  • NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
  • All controller components are UL and/or CSA approved
  • 10 ft. power cord (connector not included)
  • Cylinders with internal stops
  • Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • Smooth steel tops
  • 3.75 in. straight toeguards with yellow and black safety stripes
  • Lifetime self-lubricating,PTFE lined, composite bearings
  • Safety restraint maintenance bars
  • Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
  • Includes hydraulic oil

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Electrical Options:
  • Up-Down Push Button Station
  • Push Button mounted on platform with Disconnect Plug
  • Key Operated Up-Down Selector
  • Up-Down Push Button with Key Lockout
  • Foot Operated Control
  • Limit Switch
  • Booster Transformers (2 required for 3PH Power Supply)
  • Flashing Red Light
  • Two Second Up-down Warning Bell with Volume Control
  • Electric Toeguards, Tapeswitch
  • Momentary contact controls for automatic up and down operation with upper and lower limit switches and Up-Down-Stop Push Button Control Station
  • Photo Electric Cell Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
  • Whisker Switch Leveling (Unstacking/Stacking-Specify, 1 Direction Only)
Hydraulic Options:
  • Manual Down Valve
  • Adjustable Flow Control Down Valve
  • Larger Power Unit for faster lift speeds
  • Remote Power Units with 5'0" hydraulic hose
  • Three Phase Power Unit (.75HP or 1.5HP) and Linestarter, Transformer
  • Air Operated Power Unit Complete 95 psi @ 60 cfm (1 HP)
  • External, Heavy-Duty, Continuous Running Motor Power Unit with Integral Directional Valving & Large Capacity Reservoir
  • Explosion Proof Power Unit-External
  • Quick Disconnect Couplings
Mechanical Options:
  • Steel Approach Ramp
  • Steel 42" high Handrail with Midrail/Toeboard
  • Roll-Up Skirting
  • Accordion Bellows Skirts
  • Straight Toeguards for surface mounting
  • Beveled Toeguards for pit mounting
  • Safety Treadplate
  • USDA accepted epoxy coatings for Lift Platform
  • Stainless Steel Platform Overlay
  • Ball Transfer Top
  • Conveyor Tops
  • Integrally Mounted Floor Lock
Related Product Lines
ECOA Myti-Lift
ECOA Myti-Lift Type:Compact
Capacity:500 - 1,000 lbs
Travel:30"
Down Height:6"
Up Height:36"
Min Platform:12" x 24"
Max Platform:24" x 36"
Backsaver Lite Compact
Southworth Backsaver Lite Compact Type:Compact
Capacity:500 - 1,000 lbs
Travel:30"
Down Height:6"
Up Height:36"
Min Platform:12" x 24"
Max Platform:24" x 36"
Presto DXS
Presto DXS Type:Compact
Capacity:500 - 2,000 lbs
Travel:30" - 60"
Down Height:6.45" - 12.5"
Up Height:36.75" - 72.5"
Min Platform:16" x 24"
Max Platform:42" x 66"
ECOA CDL
ECOA CDL Type:Compact
Capacity:500 - 2,000 lbs
Travel:36"
Down Height:7"
Up Height:43"
Min Platform:18" x 36"
Max Platform:30" x 36"
Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Products
View all products of this category View Products
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: