Vestil EHLTX-10-39

Vestil EHLTX-10-39 Low Profile Hydraulic Lift

Load and unload skids with a pallet jack without the need for a pit when using the optional approach ramp. Superior engineering features rugged dependability. Safety features includes electric perimeter pinch point guard, emergency stop velocity fuse in cylinders, fused 24V hand held control and maintenance supports to name a few. Remote power unit comes complete with a plastic cover to protect motor from dust and debris.

Ships From:
US Map Indiana

Indiana

Made By:

Request Quote

Specifications

Model	Travel	Capacity	Height		Platform Size		Lift Speed	Motor	Ship Weight
Model	Travel	Capacity	MIN	MAX	STD	MAX	Lift Speed	Motor	Ship Weight
EHLTX-10-39	35.75"	1,000 lbs	3.25"	39"	36" x 53"	60" x 60"	7 sec	2 HP	1,470 lbs

Features

Four sided electric pinch point guard is standard
Remote 2 HP power unit comes complete with protective cover
Industrial quality, 56 Frame, 2 HP Motor delivers best torque with minimal amperage draw and maximum life
Voltage - 208-230/460 Volt, 60 cycle, 3 phase
Cast iron pump with integral valving including pressure relief valve, check valve, down solenoid valve, and pressure compensation flow control valve.
NEMA-4 Push button hand control
24 Volt, fused control circuit
Hydraulic actuators have internal brass velocity fuse w/ stainless steel spring

Conveniently located air bleed screw on hydraulic actuators
Replaceable deck, main axle pins and bearings
Rollers - Cold finished steel with case carburizing to .010 inch with Rockwell "C" 40
Pins - Cold rolled and finished to bearing manufacturer's specifications
Bearings - Self-lubricating with compressive strength of 44k psi
Swaged on high pressure hose fittings, Pump intake/return hose is 1/2"
Welding to meet A.W.S.

Options