Lift-Tables.net Logo Top Curve
Presented By Solution Dynamics, Inc. 877-860-3620
location :: home : dock : portable : ecoa : trans-a-dok tad

Trans-A-Dok TAD

ECOA Trans-A-Dok TAD

ECOA Trans-A-Dok TAD Series Loading Docks

ECOA TAD Series Loading Docks are portable loading docks, designed for use wherever a permanently installed unit is not practical. Load capacities are 3,000 to 5,000 lbs., travel distances to 55 in. with platform sizes of 72 x 72 to 72 x 96 in. or 96 x 72 in.

Portability of the TAD Series comes from a detachable dolly jack and flip-up/flip-down wheels to provide 1.5 in. underclearance when moving the empty lift.
Ships From:
US Map Flordia
Flordia
Made By:
ECOA Logo
Request Quote
ModelTravelCapacityHeightPlatform
Size
Axle Load MaxUp Speed
(F.P.M.)
Motor
Std. HP
CylindersShip
Weight
Quote
Form
MINMAXEndsSides
TAD-30-60655"3,000 lbs5"60"72" x 72"1,500 lbs1,500 lbs91.5 HP22,500 lbsQuote
TAD-40-60655"4,000 lbs5"60"72" x 72"2,000 lbs2,000 lbs91.5 HP22,525 lbsQuote
TAD-50-60655"5,000 lbs5"60"72" x 72"2,500 lbs2,500 lbs91.5 HP22,550 lbsQuote
TAD-30-60855"3,000 lbs5"60"72" x 96"1,500 lbs1,500 lbs61.5 HP32,700 lbsQuote
TAD-40-60855"4,000 lbs5"60"72" x 96"2,000 lbs2,000 lbs61.5 HP32,725 lbsQuote
TAD-50-60855"5,000 lbs5"60"72" x 96"2,500 lbs2,500 lbs61.5 HP32,750 lbsQuote
TAD-30-80655"3,000 lbs5"60"96" x 72"1,500 lbs1,500 lbs61.5 HP32,700 lbsQuote
TAD-40-80655"4,000 lbs5"60"96" x 72"2,000 lbs2,000 lbs61.5 HP32,725 lbsQuote
TAD-50-80655"5,000 lbs5"60"96" x 72"2,500 lbs2,500 lbs61.5 HP32,750 lbsQuote

Standard Power Supply required is 230V/1PH/60Hz. For operation on 115V power supply it is necessary to provide a separate 30 amp circuit and adequate wiring to assure an actual 115V at the motor contactor during full load operation. Specify if 115V is required. Three phase motor linestarter and transformer are available as options. The width of the platform is always the direction across the scissor legs, and the length is the direction of the scissor legs.

  • Alternate transfer arrangements easily accomplished
  • Internally-mounted 1.5HP, 115/230V, 1PH, 60Hz TENV intermittent duty super torque motor. Specify required voltage
  • 24V operating control voltage
  • NEMA-4X constant-pressure (water-tight, oil-tight and corrosion-resistant) "UP-DOWN" pushbutton control with 10 ft. coiled cord
  • NEMA-12 prewired control box (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
  • All controller components are UL and/or CSA approved
  • Upper travel limit switch to automatically shut off motor and pump at pre-set height
  • 15 ft. power cord with connector plug
  • Four-way safety treadplate deck, straight toeguards with black and yellow safety stripes
  • Steel approach ramp, 30 x 60 in., hinged, with 2 lifting chains
  • Steel bridge plate, 18 x 60 in., hinged with 2 lifting chains
  • Four safety chains with snap hooks
  • Removable steel handrail 42 in. high with midrail and 4 in. high toeboard
  • Rectangular, structural tube scissor legs
  • Hinged safety restraint maintenance bars
  • Surfaces degreased, oxide primed and finished with two coats of enamel
  • Detachable dolly jack and flipup/flip-down wheels for portability
  • Hard, chrome-plated, polished shafting, hydraulic rams and axles at pivot points
  • Hydraulic velocity fuse at base of each cylinder
  • Lifetime, self-lubricating, antifriction bearings at all pivot points
  • Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
  • Includes hydraulic oil
TAD Transfer Arrangements

TAD Transfer Arrangements
  • Two second warning bell with adjustable voulme control
  • Flashing red light
  • Auto wheel chock in ramp
  • Oil reservoir immersion heater with thermostat control
  • 208/230/460V/3PH/60Hz 3 phase power unit
  • Aluminun bridge plate 16" x 60"
  • Aluminum approach ramp 30" x 60"
  • Steel bridge plate 18" x 60"
  • Larger power unit for faster lift speed
Related Product Lines
ECOA TAD S2
ECOA TAD S2 Type:Dock Lift
Capacity:5K - 8K lbs
Travel:53.5" - 54"
Down Height:6" - 6.5"
Up Height:60"
Min Platform:72" x 72"
Max Platform:84" x 120"
ECOA HLD
ECOA HLD Type:Dock Lift
Capacity:5K - 12K lbs
Travel:48" - 60"
Down Height:8" - 16"
Up Height:56" - 76"
Min Platform:60" x 84"
Max Platform:96" x 144"
ECOA SLD
ECOA SLD Type:Dock Lift
Capacity:15K - 30K lbs
Travel:60"
Down Height:16" - 24"
Up Height:76" - 84"
Min Platform:72" x 120"
Max Platform:96" x 144"
Southworth M
Southworth M Type:Dock Lift
Capacity:5K - 8K lbs
Travel:59"
Down Height:8" - 10"
Up Height:67" - 69"
Min Platform:72" x 96"
Max Platform:96" x 120"
Quick Quote
Call 877-860-3620 & tell us your requirements or Request Quote
View All Products
View all products of this category View Products
Search By Specification
Search over 2,000 lift tables by 9 different specs Search Now
Solution Dynamics, Inc. BBB Business Review
Copyright 2018 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us | Follow Us on: Google+