M Series Dock Lifts

Southworth M Series Standard Duty Loading Dock Lifts

Southworth M-Series loading dock lift models are available with capacities of 5,000, 6,000 and 8,000 pounds. Platform sizes range from 6' x 8' to 8' x 10'. With vertical travel of 59" these hydraulic scissor dock lifts can service any truck bed and/or dock height.

M-Series Dock Lifts are designed and built for use with non powered transport devices like two wheel dollies, hand carts or hand pallet trucks. Model DL5-59 and DL6-59 M Series Dock Lifts feature our exclusive DURA-DOCK Construction - Galvanized Base and Legs for Maximum Corrosion Resistance.

Ships From:
US Map Arkansas

Arkansas

Made By:

Request Quote

Model	Travel	Capacity	Height		Platform Size		Throw-Over Plate Dim.	Up Speed	Motor	Weight	Quote Form
Model	Travel	Capacity	MIN	MAX	STD	MAX	Throw-Over Plate Dim.	Up Speed	Motor	Weight	Quote Form
DL5-59M	59"	5,000 lbs	8"	67"	72" x 96"	96" x 120"	18" x 60"	27 sec	3.2 HP	2,800 lbs	Quote
DL6-59M	59"	6,000 lbs	8"	67"	72" x 96"	96" x 120"	18" x 60"	27 sec	3.2 HP	2,900 lbs	Quote
DL8-59M	59"	8,000 lbs	10"	69"	72" x 96"	96" x 120"	18" x 60"	42 sec	3.2 HP	3,200 lbs	Quote

Mechanical Features:

Bevel toe guard platform
Diamond tread deck for improved traction
Diamond tread hinged throw-over plate with lifting chain
Removable steel handrails with mid-rail, 4" side kick plate and safety chain
Maintenance strut supports lift for servicing
Removable lifting eyes for ease of installation
Conforms to ANSI MH29.1 Standards

Electrical/Hydraulic Features:

Pre-wired power unit and control panel
Weatherproof NEMA 4 push-button control pendant with 20' coil cord
Oversized, low pressure hydraulic cylinders
Heavy-Duty hoses with burst strength 4x greater than operating pressure
Flow control valve with adjustable lowering time
Excess flow protection for controlled descent of lift in the unlikely event of a hydraulic line rupture
Standard Voltages: 208/230/460V - 3 Phase

Rugged Weatherproof Construction
All Southworth Dock Lifts are manufactured with structurally reinforced heavy steel plate platforms to minimize deflection. Wide base design provides increased rigidity to create the industry's most stable dock lift. Model DL5-59 and DL6-59 DURADOCK dock lifts feature corrosion resistant galvanized base and legs as standard, resulting in longer trouble-free service even in hostile environments.

Dock Transfer Configurations
Handrail and hinged throw-over plate locations should be specified if other than Style "A" dock transfer arrangements

Please Note: Only common options are listed in the quote requests. If you would like additional options from the below list quoted, please include that information in the requirements section of the quote request.

Grade level access ramp (for above ground lifts)
Accordion skirting or roller shade
NEMA 4 enclosures
Environmentally friendly biodegradable hydraulic fluid (standard on Dura-Dock models)
Mechanical wheel chock to prevent fork truck from inadvertently rolling off lift while elevated
Upper travel limit switch - mounted and wired
Warning bell with flashing light
Special paint finishes and custom colors
Corrosion resistant coatings (standard on Dura-Dock models)
Other bridge plate sizes available

Southworth Dura-Dock Product Literature (PDF 1.26MB)
Southworth Dura-Dock Owner's Manual (PDF 1.14MB)

Name:		Country:		State/Prov:		Zip:
Company:		Email:		Phone:		Ext: